Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Share 
Reply
 
Thread Tools Display Modes
Old    CONSIGLIEREG8R (consigliereg8r)      Join Date: Aug 2009       04-26-2010, 10:39 AM Reply   
I posted this before but I assumed it was perfect pass issue. It is not a perfect pass problem. Anyway it happened twice yesterday. I was pulling my son with PP engaged and when I crossed a large wake the boat dropped to idle. You could not move the throttle and engage the prop unless you turned the boat off and restarted it. It did the same thing again when I was not pulling anyone, just riding with the PP turned off. Any thoughts on what may be the problem?
Old    Baitkiller (baitkiller)      Join Date: Jan 2010       04-26-2010, 12:36 PM Reply   
Boat?
Engine?
Old    CONSIGLIEREG8R (consigliereg8r)      Join Date: Aug 2009       04-26-2010, 1:16 PM Reply   
2006 220 SAN ---PCM motor
Old    CONSIGLIEREG8R (consigliereg8r)      Join Date: Aug 2009       04-26-2010, 1:42 PM Reply   
my mechnic thought it may the "pedal position switch" whatever that is. He has not had a chance to look at it as he is an hour away.
Old    Paul (psudy)      Join Date: Dec 2003       04-26-2010, 1:54 PM Reply   
I was thinking something with the neutral saftey switch, since it wouldn't let move the throttle, but I really have no idea. I would just eat the hour drive and take it in to the dealer.
Old    JUST-IN-TIME (justintime)      Join Date: Mar 2009       04-26-2010, 8:41 PM Reply   
they had bad TPS switches, if you have DTC, digital throttle control

it will cause a code, no alarm
Old    Shawn (4hun)      Join Date: Dec 2002       04-27-2010, 8:05 PM Reply   
I have an 05 Xstar that does the exact same thing. It is going to the dealer next week for the problem. It makes it very difficult to cruise across rough water. When the boat drops to idle and its rough the bow goes under the waves. Not very safe.
Old    Shawn (4hun)      Join Date: Dec 2002       04-27-2010, 8:08 PM Reply   
I thought it might be the safety lanyard so last year i hard wired it. Didn't do anything.
Old    JUST-IN-TIME (justintime)      Join Date: Mar 2009       04-28-2010, 10:32 AM Reply   
once you plug it into computer

the TPS shows bad high low voltage

you can test this with a volt meter
Old    CONSIGLIEREG8R (consigliereg8r)      Join Date: Aug 2009       05-01-2010, 2:18 PM Reply   
fixed- my dude at Fla Inboard found a loose wire at the fuse box. No charge for the repair. He rocks

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 5:03 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us