Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Thread Tools Display Modes
Old     (ryand121)      Join Date: Feb 2007       01-12-2010, 3:05 AM Reply   
What do you guys recommend? I like the new Fulton F2, but not sure if it mounts up or not. Thanks a lot.
Old     (marknjenn)      Join Date: Feb 2005       01-12-2010, 6:13 AM Reply   
Fulton F2 is worth every penny! Mounts to 4 and 3 inch tubes.
Old     (insuranceman)      Join Date: Jun 2005       01-12-2010, 6:41 AM Reply   
it will not mount up. with some fabrication you can make it work.
Old     (gregg_rossi)      Join Date: Feb 2009       01-12-2010, 8:24 AM Reply   
There is a post on Mastercraft TeamTalk about what it takes to make an plate to mount it. Looks like if you know what you are doing it can be done.
Old     (dhcomp)      Join Date: Jun 2003       01-12-2010, 9:18 AM Reply   
Get the Fulton. If you aren't the Do it yourself type, take it to a trailer shop, and have them do the conversion.

I've used them a lot at tournaments, and they freaking rock. Worth the $$$ for sure.
Old     (cwfletch)      Join Date: Dec 2009       01-12-2010, 9:23 AM Reply   
My (non MC) trailer came with the swivel mount Fulton (cheaper model), bought the F2 but wouldn't fit either. I went with the Fulton XP15L Swivel Mount, just as smooth as the F2 and bolts right up.
Old     (talltigeguy)      Join Date: Sep 2003       01-12-2010, 12:09 PM Reply   
I started the thread at TMC owners that has some terrific ideas from guys about how to mount it.

The MC trailers are 6 inch beams. I just ended up doing it the cheapo way and drilled holes in the frame and bolted her right up. I am not sure it really is all that much easier to raise the boat than the original fulton, but probably a little at least.
Old     (hatepain)      Join Date: Aug 2006       01-12-2010, 2:28 PM Reply   
My new trailer has the Fulton F2 and I love it! It's light years better than the standard Fulton jack. It's a must have if you're replacing yours.
Old     (steve_jones)      Join Date: Jun 2006       01-12-2010, 9:30 PM Reply   
Must be timing. Ours just died too.
Old     (witness140)      Join Date: Dec 2008       01-13-2010, 8:54 AM Reply   
F2 is great, until the roll pins securing the gear to upper shaft fall out, and then the handle flies across the highway.....

Had it happen twice so far. Waiting on warranty replacement, which was not a problem.

The F2 has 2 plastic wheels, which do not like to track well when repositioning trailer - especially empty. THey love to just rotate 90 degrees to direction of travel and skip along asphalt or make a nice trench in grass. With 2 wheels the trailer is also a little harder to laterally move that inch or two that you need when the truck isn't perfectly lined up with the tongue. The old single wheelers could be manipulated left and right several inches to 'fine tune' when mating to the ball.

Much sturdier than the older POS jacks, just not the be-all-end-all.


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 7:16 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us