Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through July 08, 2003

Share 
Reply
 
Thread Tools Display Modes
Old    listen2cky            07-03-2003, 10:35 AM Reply   
I'm about to install my big air pylon today and I was wondering if any of you could give me any pointers on where in my boat (an '89 sea ray) I should put it. I'm thinking near the back so it will be out of the way.

I am also wondering if I should use any epoxy to make sure the screws remain tight in place so that the plate doesn't move at all.

If you have any pointers or suggestions i'd appriciate them.
thanks.
Old    fff88            07-03-2003, 10:45 AM Reply   
I put a piece of 1/2 inch plywood under my deck and put it in the back right in front of the motor on the sterndrive boat. i used long bolts with lock washers and locking nuts. Out of the way and worked fine. Most people will say toward the center of the boat, but, you want some room, so, the back works fine.
Old    jmccallum            07-03-2003, 11:24 AM Reply   
People have said the back is no good. I'm with Frank... not sure what difference it makes. Mine is just in front of the engine cover



Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 3:38 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us