Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Wakesurfing

Thread Tools Display Modes
Old     (daylorb)      Join Date: Jul 2009       08-24-2009, 9:33 PM Reply   
Has anyone ever tried putting together a wakesurfing based on the Simmons Planing Hull designs? I'd think a mini, or micro Simmons would work pretty well at 4.5-5ft in length...
Old     (surfdad)      Join Date: Sep 2004       08-25-2009, 7:10 AM Reply   
Interesting concept. I think we see influences in some of the boards available, if not the full design.

Cut 'n paste of the recap from the last URL:

1) Nose rocker. This is used in order to gain more lift per square inch from the nose area so that the board can accelerate more quickly on takeoff

2) A relatively parallel rail line. Lindsay Lord's planing hull theory ( used by Simmons) implies that a parallel rail line reduces drag.

3) A wide tail. Planing hull theory tells us that a wide planing hull has a better lift/drag ratio than a narow one.

4) A hard edge at the tail. planing hull theory again. . . a hard edge gives a cleaner wake and thus, less drag

5) Zero tail rocker, this reduces drag
Old     (daylorb)      Join Date: Jul 2009       08-25-2009, 11:36 AM Reply   
I definitely see a lot of it in wakesurfing design, but I have a feeling that the sum of the whole is greater than the parts.

Also - there seem to be a lot of variations on them - and when I think "Simmons Planing Hull" I think of a board like this:

Notice the design details like the concave bottom between the fins, the stepped deck (very common in windsurfing - my main sport), etc.

I feel like a lot of the boards I see use one part or the other, but not all. Take the parallel rail line - I feel like I see this on "beginner" or "big guy" boards, but not on something that is intended to be super-high-performance (with some exceptions).

Also feel the thickness and stepped deck is often lacking.

I'd love to have something like the board in the blog link above, in a 4'6-5' ish length, 2" thick in the center, dropping to 1" at the rails, glassed in fins, the entire bottom and fins sanded with 600 grit to break the surface tension - just something insanely fast that still turns well enough (with the speed, the idea would be to turn it off the lip with only the back 1/3 in the water - so in theory it turns like a fish).

Just thinking out loud.
Old     (bigcatpt)      Join Date: Aug 2007       08-25-2009, 10:50 PM Reply   
Are you guys even speaking english??? Wow! Thats heavy stuff! Good luck with that anyway!


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 3:25 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us