Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through July 28, 2009

Share 
Reply
 
Thread Tools Display Modes
Old    Corey (cweed)      Join Date: Sep 2008       06-28-2009, 9:50 PM Reply   
Heading back in from a great day on the water, hit a roller no bigger than one's I've hit 1000 times before on Sammamish when there was a loud BANG and my wife yells "Holy S**t STOP!"
The board rack's clamp bolt that was right over my head had snapped, the whole rack rotated and fell right behind my driver's seat landing on the floor of the boat.
Long story short no one was hurt and no damage to the boards or the boat, thank god my 3 year old was sitting on the other side and that it didn't fall a few inches more forward when it hit...
Here are some pictures, not really sure what can be done to prevent something like this. I'll send these pictures to Skylon too and see what I should do...

Upload
Upload
Upload
Upload
Upload

(Message edited by cweed on June 28, 2009)
Old    Bill K (bill_airjunky)      Join Date: Apr 2002       06-28-2009, 10:59 PM Reply   
Glad to hear no one was hurt.

The brackets on my Dbot speakers have safety cables around the tower in addition to 4 bolts, 2 on each side. Looks like a pretty cheezy design in comparison.
Old    Jay T. (wakebrdjay)      Join Date: Apr 2008       06-29-2009, 6:36 AM Reply   
Doesn't Skylon give a torque spec. on their instruction sheet.Those cap screws will break like that when over tightened.Not saying that's what you did,just a possibility.X2 on the nobody hurt esp. your baby.

(Message edited by wakebrdjay on June 29, 2009)
Old    Ian Ashton (ian_ashton)      Join Date: Jul 2008       06-29-2009, 7:05 AM Reply   
The bolt on my Lip wake rack broke last week, only the board and rack fell into the water, and none of us noticed! Got back to the marina and I was wiping the boat down, looked up and it was gone. Luckily we were able to find it floating in the lake, just as a couple of jet skiers were pulling up to it.

Needless to say I have since replaced all the hardware with Grade 8 bolts.
Old    Corey (cweed)      Join Date: Sep 2008       06-29-2009, 7:07 AM Reply   
That's actually the only rack on the tower that was "factory installed" The rest I did myself, but I will try and find what the torque specs are and check that, thanks...
Old    Tampa Wake (tampawake)      Join Date: Mar 2008       06-29-2009, 7:09 AM Reply   
Off topic glad your garage looks like crap just like mine some wakeboard stuff and a bunch of plastic bikes, trikes etc. Glad your ok man. I have have 2.5 y/o twins
Old    Greg S (roomservice)      Join Date: Dec 2006       06-29-2009, 7:19 AM Reply   
Looks like a total loss. So sad. Time for a new boat imo.
Old    David Hickman (evadehickman)      Join Date: Apr 2008       06-29-2009, 7:46 AM Reply   
Kind of a weak looking design to me, with only one bolt on each side of the clamp that holds the rack to the tower. I've installed a few racks on my boat, and they have all had a total of four bolts, 2 on each side of the clamp. Stronger design overall, esp. for holding up two boards, but also safer. If one snaps, 3 are still there....
Old    Bruce Mac (brucemac)      Join Date: Dec 2005       06-29-2009, 9:37 AM Reply   
wow, close call. glad nobody was hurt. early saturday morning was awesome on samm.
Old    Nu Bu (05mobiuslsv)      Join Date: Apr 2006       06-29-2009, 9:40 AM Reply   
Corey sorry to hear that I think you crossed my wake that day .

Seriosly though glad nobody was hurt and the boat wasn't damaged, that could have been bad.

(Message edited by 05mobiuslsv on June 29, 2009)
Old    Bruce Mac (brucemac)      Join Date: Dec 2005       06-29-2009, 9:43 AM Reply   
lol, it was a BU fest at the ramp when we were coming in around 11:30 saturday morning. there must have been 5 newer BU's launching. didn't see a blue and black one though.
Old    Nu Bu (05mobiuslsv)      Join Date: Apr 2006       06-29-2009, 11:33 AM Reply   
Hope you're not referring to mine, mine is Moonbeam and Black.
Old    Bruce Mac (brucemac)      Join Date: Dec 2005       06-29-2009, 11:37 AM Reply   
ohh, okay, moonbeam, so it's gray'ish. for some reason, i was thinking yours was a really dark blue and black. just saw your profile pic. :-)
Old    Mikeski (mikeski)      Join Date: Aug 2003       06-30-2009, 12:13 AM Reply   
Another great example of Skylon Quality...
Old    Bill K (bill_airjunky)      Join Date: Apr 2002       06-30-2009, 9:00 AM Reply   
I glanced at all my racks last night. I don't have any with only 2 screws. All board, speaker & foil racks have 4 screws. Anything less is asking for a problem when it gets choppy.
Old    Dorian lambert (lilsumo)      Join Date: Sep 2008       06-30-2009, 9:36 AM Reply   
Go with a Grade 8 bolt and a little Loctite 242 blue and that problem will be gone.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 7:33 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us