Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through December 15, 2008

Share 
Reply
 
Thread Tools Display Modes
Old    Nathan Hoag (dreamer69)      Join Date: Sep 2006       10-10-2008, 3:58 PM Reply   
We have an 04 X-10 and the very last board on the teak platform has a major crack in it on the one side. Would like to replace that board only. What do you guys think? Will we be able to make it match color wise? Where can I find teak close to that size?
Old    TigeMike (chpthril)      Join Date: Oct 2007       10-10-2008, 4:29 PM Reply   
I had to repair/replace a couple of boards on a 10 year old Teak deck a few years back. I got a Teak board at a local specialty wood supplier. Once the broken pieces were replaced and the entire deck was refinished and oiled, you really couldn't see a diff.

The only bad part wad the board coast $80 but due to it's thickness, we planed off about $40 of it.
Old    wakemann (wakemann)      Join Date: Apr 2006       10-11-2008, 11:30 AM Reply   
You can try to contact Teakworld in lebanon TN. The were the supplier for most if not all of the tournament ski boat manufactures. The also sell replacements, so I would think you could get boards from them as well. I bought a transom saver piece from them before and it mounted right on the the existing platform. Teakworld 98-B WHIPPOORWILL ROAD LEBANON TN 37090, Phone: 615-444-7269, Fax: 615-444-7969, Email: TEAKWORLD@HUGHES.NET
Old    Nathan Hoag (dreamer69)      Join Date: Sep 2006       10-12-2008, 9:38 PM Reply   
Thanks for the info. I have emailed them about the platform and may email again about the transom saver piece.
Old    Nathan Hoag (dreamer69)      Join Date: Sep 2006       11-03-2008, 1:44 PM Reply   
O.K. I got the new teak from Teakworld, and have it installed. Looks great, but know I am refinishing the old to look like the new. They are real close color wise but the new one is alot smoother than the old. Can I sand the old down to make it like the new????
Old    Goodwin (ridetige)      Join Date: Oct 2008       11-03-2008, 3:40 PM Reply   
No problem on sanding down the teak. I had a 92 Malibu with teak swim step. I got tired of oiling it all the time, so I sanded it down and coated with a marine spar varnish. It lasted about 4 years looking nice before I had to do it again before I sold it.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 5:51 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us