Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Wakesurfing

Thread Tools Display Modes
Old     (chicagox55)      Join Date: Oct 2008       10-29-2008, 11:12 AM Reply   
I am a big guy, 6'3" 260 and I am having trouble surfing after I toss the rope. I have a Phase 5 oogle and it just seems to not be doing the trick. My brother has the same problem @ 235lbs. Our wake is plenty big, 24ssv 2500 lbs ballast and usually 8 or more people. what would be another board to buy that may be better for a bigger guy? ~Thanks
Old     (donnieb)      Join Date: Nov 2006       10-29-2008, 12:01 PM Reply   
I think the Inland Surfer Red Tide would be a good choice. We generally use the IS Blue or Yellow Loogey, but I tried a friends Red Tide and loved it. I ended up buying one and it works great for heavier folks. It also works well for my daughter (she's only 100 lbs and the RT is very stable) and me (185 lbs).

PM me and I can send you pics of us riding it.
Old     (mbwakesurfer)      Join Date: Jul 2007       10-29-2008, 2:52 PM Reply   
Shred Stixx Ja Mako is good for bigger riders that still wanna rip!
Old     (jdjjamesz)      Join Date: Mar 2008       10-29-2008, 3:49 PM Reply   
I weigh 220 and a stretch board works good for me there custom made for a bigger guy to
Old     (ridetige)      Join Date: Oct 2008       10-29-2008, 5:07 PM Reply   
TWP Comp X 5.0 is a great board for big guys.
Old     (wetsounds1)      Join Date: Jan 2006       10-29-2008, 5:28 PM Reply   
X2 on the Walker Project Comp X 5.0. This is my brother in law riding the 5.0. He is 6'3" and 290. Rides ropeless all day, can even do a 360 and almost recover.

This is the wakeoutlaws special edition gold one.

Wet Sounds

Old     (jdjjamesz)      Join Date: Mar 2008       10-29-2008, 6:51 PM Reply   
this is what stretch boards do i weigh 220 Upload
Old     (dennish)      Join Date: May 2005       10-29-2008, 7:17 PM Reply   
Check out the Walker Inventory closeouts in classified section.
Old     (jdjjamesz)      Join Date: Mar 2008       10-29-2008, 8:14 PM Reply   
this guy is 6/4 225 on a stretch board size 15 foot and he loves them Upload
Old     (jdjjamesz)      Join Date: Mar 2008       10-29-2008, 8:16 PM Reply   
its also what you want out of a board if your looking to try to surf more back there then these boards are good
Old     (h20k9)      Join Date: Aug 2007       10-30-2008, 7:08 PM Reply   
as long as its made in the USA you will be fine no matter what you choose
Old     (jdjjamesz)      Join Date: Mar 2008       10-30-2008, 8:34 PM Reply   
yeah i think alot of boards for wakesurfing are made in china not stretch
Old     (jstieg)      Join Date: Apr 2007       10-30-2008, 9:51 PM Reply   
i dont think it matters where a board is made as long as it works. some of the best boards are made out of the country.
Old    mobster            10-30-2008, 10:29 PM Reply   
Name three
Old     (surfdad)      Join Date: Sep 2004       10-31-2008, 5:56 AM Reply   
Isn't the Placebo line of Lost Enterprises manufactured at the Cobra factory in Thailand?
I remember an article and subsequent a$$ chewing of Matt Biolos for it in '06, although I can't find it now.

This thread at Swaylocks references the issue.
Old     (surfdad)      Join Date: Sep 2004       10-31-2008, 8:49 AM Reply   
I finally found that article. It isn't Cobra at all. According to the article, the Flexlite company is based in Vietnam, which is the sandwich tech used in the Placebo. I may be interpreting it wrong, but I think Placebo is manufactured overseas. The article I was thinking about is here
Old     (h20k9)      Join Date: Aug 2007       10-31-2008, 11:34 AM Reply   
all i can say is my bros in Florida,North carolina and Texas who help glass my shapes actually live off that $200 generated from keeping it proudly in the USA

Doug Haut,Stretch and Johnny Rice have been my personal favorites my whole life.The fact Stretch has entered the realm of wakesurf manufacturing should tell us all the best is yet to come

i dont sweat the competition from the plastic toys coming from china at $141 a stixx
just sayin two wrongs dont make a right
instantly outsourcing wakesurfing to china is a biotch slap in the face to the sport
those of you who are doing it are only devaluing the worth of it
Old     (surfdad)      Join Date: Sep 2004       10-31-2008, 12:21 PM Reply   
I always get confused with this. Haut, Stretch and Johnny Rice all have shapes offered by Surftech. So all those folks approve of imported boards, even if they ALSO shape in the USA.

If Placebo is manufactured in Vietnam, I'd be hard pressed to call any of those boards toys.

The lines seem so blurry to me anymore. Plus I think most folks are just hoping to be able to afford a board in this economy.

Surftech boards for:



Johnny Rice
Old     (kernaltao)      Join Date: Oct 2008       10-31-2008, 1:13 PM Reply   
You are entitled to your opinion, and I am entitled to my opinion, and I disagree. That's one of the great things about America! The other is that we have a lot of choices as consumers. Some can't afford to pay the money for a hand manufactured board, but they still want to enjoy the sport. Their best option is to purchase a "plastic toy". That doesn't devalue anything. It actually increases the value. If more people get into the sport, there is a higher likelihood that in the future, they would save up and purchase one of the boards you mentioned. If they never buy the "plastic toy", it's likely they never get into the sport, in which case, they would never purchase a "US board".

I'm tired of Americans reprimanding others for purchasing products manufactured outside of the US. I'm already supporting America by paying taxes, investing in US companies, and purchasing MANY things produced in the US (because they are the best quality for the lowest price). Should I feel bad if I purchase a product made outside of the US? No way. The reason why many things are more expensive in the US is due to Americans getting paid far too much. There are unsilled trade workers earning as much as $80/hr (I won't mention which). Most have just a high school diploma! I'm not saying that's wrong. If they are able to negotiate that rate, good for them! But I shouldn't be expected to purchase that product blindly just because it is produced in the US. The demand for that product should drop due to competition, and that company would be forced to lower wages to compete. That makes for a fair economy.

I buy the best product that I can afford. If that product is made outside the US, so be it. If I find out that a product is being produced using unsafe/unfair conditions, I won't purchase it. If the cost between a US produced product and one made outside is the same, I'll buy the US one. But to buy items blindly just because they are made in the US doesn't make sense to me. Just because they are produced here doesn't mean they are the best choice for me. I look at price, quality, and for larger ticket items, company history & practices, etc.

Some may label me un-American. I think I am ALL American. I'm an informed consumer looking for the best products at the lowest price.

Let me put it this way: If we all strictly purchased items manufactured in the US, what happens to all of the US workers that import items from other countries? Why shouldn't they be supported? Would you rather they don't have a job at all? This is just to illustrate a point that to limit your buying habits purely by a single factor is ridiculous. I call it un-American!

BTW, what are the "two wrongs" you mention?
Old     (kernaltao)      Join Date: Oct 2008       10-31-2008, 1:18 PM Reply   
Great points, surfdad. That's what I mean about being informed!

In case anyone was confused about the timing of the posts, my last one was in response to waterdog's post, not surfdad's.
Old     (chicagox55)      Join Date: Oct 2008       10-31-2008, 1:37 PM Reply   
I will buy a board made in the USA! For sure! I just want a board that will hold my big ass that I can rip on!!
Old     (rallyart)      Join Date: Nov 2006       10-31-2008, 2:49 PM Reply   
So I should make sure I don't buy a board make in the USA because I don't live there?

Naahhh... I think I'll just buy the best one for me. I do pay attention to the quality of manufacture and that dictates to some degree where I buy from. Free market works much of the time.
Old     (tonyv420)      Join Date: Jul 2007       10-31-2008, 3:22 PM Reply   
buying US is always good, but sometimes you have to just buy what suits you best ( budget/performance). Not all of us can afford a 500+$$ board. Heck surf on a piece of plywood if you can have fun doing it. Also you can always buy a used stick
Old     (surfdad)      Join Date: Sep 2004       10-31-2008, 3:28 PM Reply   
Hey John, I can respect that being made in the USA is an important criteria for you. I just listed all the manufacturers that actually manufacturer or job out a board in the USA.

Austin Surf Company
The Walker Project
Roush Creations
Outlaw Surfcraft
Shred Stixx
Shoreline Lakeboards
Cabases (sp?)

It feels like I am missing some folks.

Shred Stixx offers the Hazen and Stieg signature models plus the new skimmer (too small for you) that are shaped here in the USA plus I know that Jerry can have a board shaped to your size, I think through Outlaw.

Everyone of those folks has a board or can make you a board that will fit your size and wake.

Phase 5 just mentioned that they have a 1" thick board that was purported to be good for big guys, but I'm not sure if that's available at retail yet.
Old     (h20k9)      Join Date: Aug 2007       10-31-2008, 5:35 PM Reply   
good lookin out surfdad,a month ago i walked into Dougs shop and told him thanks for not running us off as a kid when he would catch us watching him thru his exhaust fan.I also told him thanks for being a mentor to all us harbour rats and i would never sell out..At that point he let me in on a lil secret..He ownes Independent,Santacruz skate,Atomic and a few others,all overseas companies!Then he told me its ok as long as you price it accordingly and tell the truth about where it comes from.He finished by saying only begginers buy china stixx,they will learn as they become better surfers

surftech has a lock on all the santacruz guyz..they were the first to go abroad and made it mainstream with the core names involved.

the thing about surftech is they sell their stuff accordingly,retails usually around 350 a stixx er could say they helped make surfing more doable(affordable) for beginners

way more respectable than $550 plus shipping robbery for a china stixx with fins and traction that cost $141us, shipping included!
Old     (h20k9)      Join Date: Aug 2007       10-31-2008, 6:03 PM Reply   
carl,i see your point and i too am all for healthy competition.but dont confuse the issue with all the worlds drama

if unsafe/unfair working conditions are a factor in your purchase decision than by all means google "chinese human rights",let me know when you find something

then google "pollution chengshen" if this doesnt shed light on what outsourcing has done to chinas natural resources not to mention its unborn babies then i dont know what will

mabe google chinese workmans compensation or even better hazardous materials regulatory commision.

two wrongs are taking money from a fellow american board builder for greed
getting on WW acting like its ok in the name of "i pay my taxes so i can sell you out if i wanna" good job,way to go.good lookin out for the homeboyz

i would never call u unamerican,i know your just looking for a good time goes on riders will become more educated and the price of these plastic toys will drop by happend in the surf world,its gunna happen in the wakesurf world bet the ranch on it
Old     (kernaltao)      Join Date: Oct 2008       11-01-2008, 7:43 AM Reply   

That is precisely why I do not buy anything produced in China (well, I try not to; i'm sure there are products that have other items inside that are produced there). I never said I did, and I never condoned that. I am not confusing this with "all the worlds drama". My point was that you should purchase based on quality, price, and when possible, from a manufacturer that has decent work conditions.

I am taking care of the homeboyz; by purchasing some items manufactured in the US and when I buy products made oustide of the US, I am supporting the homeboyz that import, transport and sell the products. I take care of them all! It seems that you do not.

I still don't see the 2 wrongs; you just listed 1. Also, how would it be "taking money from a fellow american" by just purchasing a competing product? That would not be "taking away" money at all. It would just not be giving that manufacturer the business. What if I purchased a competing product (not one of YOUR homeboyz) that IS produced in the US? It seems that you would have a problem with that as well.

Purchasing based on price & quality is just fair competition. You seem to not support this. In fact, it seems that you would prefer we don't import ANYTHING that is produced here in the US. Or, at least, that no one purchase it, which would lead to the same thing. That certainly does not lead to fair competition and it would mean the loss of jobs for MANY Americans.

I'm not selling anyone out. In fact, as I mentioned above, I am supporting ALL American businesses, including those that import, transport and sell overseas products.

Again, my point from the beginning was that I really take offense when someone tries to reprimand me for not always choosing a US manufactured good over one produced overseas. I live in Michigan, and I have seen this far too much with the auto industry. You can't even park a foreign vehicle in the lot of one of the US manufacturer's facilities without someone saying something about it or even getting the car vandalized! Curiously, though, you don't get any reaction if you park a Ford in a GM lot! That really makes me laugh. They don't understand that almost all foreign car makers employ about as many Americans as the US car makers!

Anyway, I just wanted to illustrate that buying non-US manufactured products over ones produced in the US is not bad. It is actually better for everyone in the US. Buying only US products is only good for those that manufacture, transport and sell those particular products. A better way is to purchase based on multiple factors (listed before) and not just on where it is produced.


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 7:20 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us