Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through May 08, 2008

Share 
Reply
 
Thread Tools Display Modes
Old    jason rogoz (phunnel)      Join Date: Aug 2007       05-02-2008, 3:40 PM Reply   
I was wondering if anyone has put the clear 3M tape on the back of their boats above the swim platform to protect it against people chipping the gel coat while putting on boards. How well does it stand up to the water and such

thanks
Old    Kevin (deltaboy)      Join Date: Jan 2007       05-02-2008, 3:46 PM Reply   
Have it on our boat and so far so good. Barely can see it and does the job.
Old    mendo247            05-02-2008, 4:12 PM Reply   
Yeah ive always ran it. Usually change it out every couple years. It tends to get nicked up and sometimes starts to crinkle where it gets hit hard but thats just saving your boat.
Old    Nu Bu (05mobiuslsv)      Join Date: Apr 2006       05-02-2008, 4:30 PM Reply   
I've got it and it serves it's purpose.
Old    jason rogoz (phunnel)      Join Date: Aug 2007       05-02-2008, 4:40 PM Reply   
where did you guys pick it up from? what is the height of the piece that you have installed? any pics? sorry for all the questions :-)
Old    Nu Bu (05mobiuslsv)      Join Date: Apr 2006       05-02-2008, 4:43 PM Reply   
Got mine from Boaters world. Piece is about 2.5-3" high. Sorry no pics, you can't even see it anyways.
Old    Kevin (deltaboy)      Join Date: Jan 2007       05-02-2008, 5:07 PM Reply   
Overton's 4" I think.
Old    Kevin (deltaboy)      Join Date: Jan 2007       05-02-2008, 5:24 PM Reply   
Here Jason this is what I have. Apparently it comes in 3 or 5 inch. This is a good price too. http://www.overtons.com/modperl/product/details.cgi?i=73790&pdesc=TransomShield_Protectors _TransomShield_3_x_105&cname=Hardware&aID=24L&merc hID=1009&r=view

If you look at the reflection of the transom on the end of the swim step that is where it is in the picture.

(Message edited by deltaboy on May 02, 2008)
Old    Craig Glass (my_malibu)      Join Date: Feb 2008       05-02-2008, 10:14 PM Reply   
west marine has them on sale for $40 clearence
Old    Kevin (deltaboy)      Join Date: Jan 2007       05-03-2008, 12:18 PM Reply   
31 at overtons
Old    TRDon (trdon)      Join Date: Sep 2007       05-03-2008, 1:46 PM Reply   
The easy-to-install TransomShield is a shock-absorbing, clear, UV-stable urethane polymer that is only 12mm thick. Guaranteed not to yellow

Holy crap, that is nearly 1/2 inch think. That has to be a typo.
Old    Joey (mcrider)      Join Date: Jun 2007       05-03-2008, 2:19 PM Reply   
can someone post a link for the 3m tape... can't seem to find it for fiberglass only auto paint
Old    Nu Bu (05mobiuslsv)      Join Date: Apr 2006       05-03-2008, 2:26 PM Reply   
Seriously Joe why don't you try the above link.

Don that has to be a typo, the stuff on my boat is about 1/16" thick.
Old    Kevin (deltaboy)      Join Date: Jan 2007       05-03-2008, 10:44 PM Reply   
Maybe more like 12 mils. Agree w/ newbu . Its thiner than my reg. stickers. By the way Joe this stuff is the 3m clear adhesive.
Old    David Heptinstall (davidhep23)      Join Date: Feb 2007       05-04-2008, 7:45 AM Reply   
I just put the 3m clear adhesive on. The only complaint I have is I wish I had put it on last year as soon as I purchase the boat.
Old    Diggs (pdxWAKE) (tyler97217)      Join Date: Aug 2004       05-04-2008, 8:28 AM Reply   
yeah i have 3m clear bra on my transom and also on my gunwales... i love it... completely protects the boat
Old    Chad Diehl (dicky_diehl)      Join Date: May 2007       05-04-2008, 7:31 PM Reply   
hey diggs what product are you using and does it look good on the gunwales with the black gelcoat.i was wondering becuase i've got a black 22ssv like yours and was thinking about getting something to protect the paint from scrathes so as much info as you could give would be appreciated.
Old    Erik (etakk7)      Join Date: Apr 2006       05-04-2008, 9:38 PM Reply   
I have the 3" TransomSheild (with 3M adhesive) on my transom, beginning last summer. It's pretty thick and hardly noticeable. I'm extremely impressed with it. When surfing last year I lost my balance and shot the board tip straight into the transom. I took a healthy nick out of the sticker but it did it's job and protected the gelcoat. I also got mine on clearance from Westmarine.com and I would do it again in a heartbeat. I tossed around the idea of making a teak transom protector but that would not have been 3" tall and wouldn't have helped on the "accident" I had with the surfboard.
Old    Diggs (pdxWAKE) (tyler97217)      Join Date: Aug 2004       05-05-2008, 7:50 AM Reply   
Chad,
I just used plain old 3M Clear Bra that I got from a friend that runs a sign shop. I put a patch about 6 inches high accross the transom and then put my Supra sticker right over it. On the gunwales I put it from the tower back to about the gas cap. If you are not familiar with the stuff have a pro install it or you will not be happy with the results. Go to a window tinting or automotive accessories place and they should be able to help you out.
Most people have no idea I have it on my boat. You can see it after you wax the boat, cause you will see the wax line at the sticker, but then you take a tooth pick and pull out the wax and it is relatively unnoticeable unless you know it is there... I woiuld do it all over again if I have a colored hull
Old    Chad Diehl (dicky_diehl)      Join Date: May 2007       05-05-2008, 8:25 AM Reply   
thanks diggs i appreciate the info here is a pic of my setup.Upload
Old    Diggs (pdxWAKE) (tyler97217)      Join Date: Aug 2004       05-05-2008, 9:30 AM Reply   
Daddy likes!
Old    Newty (newty)      Join Date: May 2005       05-05-2008, 10:11 PM Reply   
Diggs, can you get me your 3m guys #?
Missed you guys friday for the fireworks. Actually missed everyone.. We were the only boat out there.
Really need to get that stuff on there. That color shows everything, and then some!
Old    Diggs (pdxWAKE) (tyler97217)      Join Date: Aug 2004       05-06-2008, 8:00 AM Reply   
Newty....
We missed you out Sunday and Monday... Good times... littel wind chop but fun...
My guy is not really doing this, but APEX in Beaverton is doing this stuff and will do a better job anyway. Give me a buzz later today and I will get you his contact info...
Old    Brady (pdxWAKE.com) (big_b_21v)      Join Date: Oct 2006       05-06-2008, 10:27 AM Reply   
Hey Ryan, Here is the Apex information. I just happened to have the card sitting on my desk. The guys at Kingpin are using them too. They just gave me the card yesterday.
apexrestoration.net
12225 SW Millikan Way
Beaverton, OR 97005
503-646-2739
Old    Diggs (pdxWAKE) (tyler97217)      Join Date: Aug 2004       05-06-2008, 12:45 PM Reply   
they seem really cool... they do great vinyl repair, tinting, etc.... they will probably remember if you tell them my black boat. Can't remember the guys name to talk to, but I could find it if needed....
Old    Dave (millerda31)      Join Date: Dec 2004       05-06-2008, 12:55 PM Reply   
Newt,

Ultimate Window Tinting also does the 3M clearbra. I have spoken to them about it and just need to get my boat over there so they can custom cut some pieces for it. It's a bit closer for us over here in Vancouver.

Ultimate Window Tinting
6900 NE Highway 99
Vancouver, WA. 98665
(360)695-4444
Old    Johnny (johnny_defacto)      Join Date: Sep 2006       05-06-2008, 4:33 PM Reply   
I use the 3M clear strip too... 4" high x 36" long. It works really well and in 2 seasons has not begun to yellow. looks as new as new.
Old    Newty (newty)      Join Date: May 2005       05-06-2008, 7:09 PM Reply   
Cool! Thanks for the info fellas!
Hey just a heads up I found a detail/tint mobile (Portland and sorrounding areas to Woodland) guy thats super affordable and does pretty good work. PM me if you want details. He's doing my tint next week I'll let you know how it turns out.
Sorry for the hi-jack.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 6:09 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us