Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through April 09, 2008

Share 
Reply
 
Thread Tools Display Modes
Old    Clubmyke (clubmyke)      Join Date: Aug 2004       04-06-2008, 10:33 AM Reply   
what is the easiest/efficent way to bleed trailer brakes without making a mess ?

i was looking at a vacuum pumps and there are different ones- any suggestions ?
Old    Kevin (pri3st)      Join Date: Aug 2007       04-06-2008, 10:42 AM Reply   
http://www.speedbleeder.com/
Old    Clubmyke (clubmyke)      Join Date: Aug 2004       04-06-2008, 10:57 AM Reply   
wow !!! way cool !! many thanks !1
Old    Scott Legge (w00taz)      Join Date: Jun 2007       04-06-2008, 1:39 PM Reply   
I do it the old way I use a mityvac hand suction pump. Works great.
Old    Aaron Ware (99_slaunch)      Join Date: Oct 2005       04-06-2008, 1:58 PM Reply   
Crack the bleeders open and let gravity take over. Just don't let the master cylinder get dry.
Old    alan plotz (alanp)      Join Date: Apr 2001       04-06-2008, 8:15 PM Reply   
i second the mityvac works great.
Old    Sparky Jay (wake_upppp)      Join Date: Nov 2003       04-06-2008, 8:42 PM Reply   
Aaron, you can't be serious...
Old    Aaron Ware (99_slaunch)      Join Date: Oct 2005       04-07-2008, 8:40 AM Reply   
Why not? It will push the air out yes or no? I have seen it done many times and work just fine.
Old    Scott Legge (w00taz)      Join Date: Jun 2007       04-07-2008, 4:20 PM Reply   
yea as long as the master cyl is higher than the outlets and there arent any "high spots" where air can settle in the lines. Basically brake lines have to be run like sewage. Gravity bleeding works well too im just impatient.
Old    Peter_C (peter_c)      Join Date: Sep 2001       04-07-2008, 6:18 PM Reply   
You still need to use a giant pry bar and work it just like a car, in that you pump the master up, then open the bleeders. I didn't look at the link above, but a pressure bleeder is the way to go.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 11:54 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us