Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through March 24, 2008

Share 
Reply
 
Thread Tools Display Modes
Old    Patrick (2manytoys)      Join Date: May 2007       03-17-2008, 8:53 AM Reply   
I assume it would be ok.. but wanted the Gods of WW approval... Right now I am running the stock 13.5x17 on my 04 X2 .. looking for a backup and found a 14x20 .. Would there be any problems? FWIW.. I just run with stock ballast... mix of wakeboarding..kneeboard and pullin the boys on the tube... I assume I would lose some bottom end but wanted everyones input..
Old     (1boarder_kevin)      Join Date: Mar 2007       03-17-2008, 9:12 AM Reply   
That would be a bad prop in my oppion unless you have a 8.1, which I doubt. Then again it depends on what you feel acceptible with. Most people with that boat and the rtp1 or mcx feel the 13.5x17 is to high of a pitch and go the other way. Some did run a 13.5 x 19 though and could give you more concrete info.
Old    Patrick (2manytoys)      Join Date: May 2007       03-17-2008, 9:21 AM Reply   
Boat has the mcx.. it would only be a backup because where I live it would be impossible to find a prop if I damaged it while out on the lake.. I can get it for 100$.. I know its not the perfect choice but was wondering if it would get me by in a bind.
Old    Brandon Kee (trickyboarder08)      Join Date: Jul 2005       03-17-2008, 9:23 AM Reply   
Technically you can run that prop.
BUT I don't see yo being happy with it.
Old    Nacho (denverd1)      Join Date: May 2004       03-17-2008, 9:37 AM Reply   
it would get you thru a weekend or an afternoon if you had to.
Old    Patrick (2manytoys)      Join Date: May 2007       03-17-2008, 3:56 PM Reply   
With the higher pitch it would lose bottom end and holeshot... but gain top mph right?
Old     (1boarder_kevin)      Join Date: Mar 2007       03-17-2008, 4:06 PM Reply   
if the motor can spin it
Old    VLX Envy (cavlxenvy)      Join Date: Aug 2007       03-17-2008, 11:35 PM Reply   
Yeah a 20 pitch is way too high.
Old    Patrick (2manytoys)      Join Date: May 2007       03-18-2008, 8:55 AM Reply   
Thanks guys.... I will just keep looking... kinda hard to find a MC prop because they are splined. much less a good deal on one
Old    Nacho (denverd1)      Join Date: May 2004       03-18-2008, 9:33 AM Reply   
there's an acme 537 floating around somewhere. it was cheap if i remember. good backup
Old    John Gardner (roverjohn)      Join Date: Dec 2007       03-18-2008, 9:48 AM Reply   
for $100 you could always buy it and have it repitched. You should still be in it for less then $200 unless repitching costs a lot more than it used to.
Old    Nacho (denverd1)      Join Date: May 2004       03-18-2008, 10:00 AM Reply   
that a lot of pitch to take out, but Its an option. i think you could find a better prop for the money.
Old    Nacho (denverd1)      Join Date: May 2004       03-18-2008, 10:07 AM Reply   
http://www.wakeworld.com/MB/Discus/messages/3183/558953.html?1205851622
Old    Patrick (2manytoys)      Join Date: May 2007       03-18-2008, 6:18 PM Reply   
that one wouldn't be splined would it..

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 8:36 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us