A direct replacement would be an Acme 537. The 857 is the torquer prop for heavily loaded conditions. Another alternative could the the ACME 1235, but I would have to check the clearances. How much room do you have from the tip of the blade to the hull?
I just took it in and they are fixing it, I will look for a new prop after christmas. I will be more careful the rest of the month. Thanks for the help. Any one else know of a better prop for wakeboarding? Stainless or aluminum?
i use the wakeboard/altitude 4 blade Aluminum prop that I bought as an upcharge from my Supra dealer when I got my boat. Not sure the size (maybe 14"?)and pitch though. It pulls like crazy and makes my boat have a great holeshot.
I have a like new 381 13.5 x 17.5 four blade that will fit your boat. It was used a couple of times and I kept it as a spare, but don't need it anymore. I would take yours off and a good prop shop can fix for $75-100 like new. Always good to have a spare. $300
hey everybody, jumping in here a little late, just damaged my prop yesterday. but like all the advise about fixing the old for spare and purchasing a knew. any recomendations on a prop for my v215. got a quote for an oem prop from the dealer for 420. i have no complaints performance wise with what im using but you can always find somthing better.
The direct replacement for your propeller would be our 14.25 X 14 Lc 1 1/8" XMP EDGE #466, same propeller you have now. This propeller is our wakeboard specific propeller and replaced the 13.7 X 17.5. Let me know if you have any other questions. firstname.lastname@example.org
I did some testing for Acme and all of the props they make made my XLV better. I choose the 1235 14.5 X 14.25 It is Unbelieveable!! Any way I got a new one of these in a box brand new for my efforts and I will sell it for cost which is what I paid for it and the two others before testing. Any way its a alot less than what's retail. let me know... Or if you choose a different route call Karl he's awsome and posted above.