Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through December 26, 2006

Share 
Reply
 
Thread Tools Display Modes
Old    Rich (rich_g)      Join Date: May 2003       10-20-2006, 9:48 PM Reply   
Upload

this is the engine compartment divider in my 99 205V. It's hard high-density plastic. I would like to get some similar material to repair the broken back hatch / sunpad. Any ideas of what this is and where to get this type of material? I would need a piece that's at least 4' X 4'
Old    jack43            10-20-2006, 10:31 PM Reply   
Your local Mastershaft stealership.
Old    Chris Walker (redsupralaunch)      Join Date: Aug 2002       10-22-2006, 10:41 AM Reply   
try here
http://www.usplastic.com/catalog/product.asp?catalog%5Fname=USPlastic&category%5Fna me=72&product%5Fid=10369

But also try your local plastic supplier. HDPE is a good choice.
Old    Trace (trace)      Join Date: Feb 2002       10-22-2006, 11:55 AM Reply   
That's probably HDPE, UHMW, or King Starboard, but I doubt any of those would be stiff enough for a rear hatch. Like the ABS in the other thread, get it at USPlastic, McMaster, any industrial materials supply...

I looked into rebuilding my rear hatch (making into a 3-piece) a couple years ago, and when I ran the stiffness numbers on it, the only thing that was stiff enough for a couple people to stand on, and not extremely heavy, was the honeycomb aluminum sheet. I think that was also for a 1/3 section, braced along the sides of the motor, not spanning the whole width of the boat.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 7:49 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us