Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > Trick Tips

Share 
Reply
 
Thread Tools Display Modes
Old                07-07-2005, 5:25 AM Reply   
Hi guys, I have been looking at some videos with mobe's and flat rotations, and I have been wondering, Is there any tension on the rope when you pass the bar around? It looks like it's effortless. Any help would be great
Thanks
Old                07-08-2005, 8:26 AM Reply   
no one?!
Old                07-08-2005, 10:26 AM Reply   
depends on the trick
Old                07-08-2005, 12:56 PM Reply   
on flat rotations?do you have any tension in the rope?
tks for the input cody
Old                07-09-2005, 6:44 AM Reply   
you mean an on axis spin? like a 360? if so, there is tension on the way up, but on the way down when you spin theres some slack in the rope.
Old                07-09-2005, 5:46 PM Reply   
do you do something to get this slack? or does it happen naturally? did the question make sense?!?
tks
Old    Steve™ (kingskrew)      Join Date: May 2004       07-09-2005, 11:21 PM Reply   
For an on axis spin, wait until you are in the air. Pull hard with both hands to initiate the spin. By pulling hard, you will not only begin to rotate, but you will give yourself the necessary slack in the rope to be able to pass the handle. Hope this info helps, good luck!!

-Steve
Old                07-12-2005, 2:21 PM Reply   
thaks steve. I'll try it.
thanks for your time
Old    Ringo (hymaeringo)      Join Date: Jul 2004       07-12-2005, 4:38 PM Reply   
on inverted mobes like crows you are supposed to take the trick up and over the top more than out in order to create slack to pass the handle on the way down for the last backside 180

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 5:03 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us