Articles
   
       
       
Pics/Video
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WAKE WORLD HOME
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through May 04, 2005

Share 
Reply
 
Thread Tools Display Modes
Old    craig (skier86)      Join Date: Jan 2004       04-27-2005, 1:03 PM Reply   
I have a real bad boat vibration. It felt like I hit something. I checked the prop, and it didn't have any ding in it. The boat was idling real high that day, that the vibration happenened. I pulled up the floorboards to do some investigation. The front engine mounts very loose (the nut), I could turn with my hand. The rear arm that connects to the rudder seemed loose. I could move it up and down with my hand (is that normal) please help. Im trying to figure out was is causing the vibration.}
Old    Luciano Grimblat (luchog)      Join Date: Jun 2002       04-27-2005, 1:18 PM Reply   
does it vibrate all the time or just when cruising? it could be bad carburation, and for the loose nuts, they could be the result of this vibration... or rotten stringers... vibration makes everything loose with time.
Old    C.I.E..... Evan (guido)      Join Date: Jul 2002       04-27-2005, 1:21 PM Reply   
If the motor mounting nuts were loose, then the driveline would come out of alignment. That can definitely cause severe vibration and damage the wax packing on the driveshaft. Have it checked by a professional, or if you are mechanically competent get some direction on how to adjust yourself. No guarantees, but this is a very good place to start.
Old    craig (skier86)      Join Date: Jan 2004       04-27-2005, 2:08 PM Reply   
I chaged the packing around the driveline on a different boat before. Would that that make the difference in a severe vibration if I changed it. Also, is the arm that connects to the rudder suposed to be loose. I can move it up and down by wiggling it. I believe that it should only be able to be moved back and forth. The arm connects to the rudder via a vertical rod. The connection arm has has an ilet that slides up and down the vertical rod, it looks like it has a nut to tighten the two togeather. or is it supposed to be loose.
Old    Face Planter (mastercraft1995)      Join Date: Nov 2002       04-27-2005, 4:05 PM Reply   
Get the shaft aligned and the motor bolted back down and I bet it goes away.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 1:53 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2012 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us