Mutiny Vandall LTD

(MattWake22) · (MattWake22) **Join Date: Jan 2013** 07-13-2015, 5:57 AM

Hey guys. I am riding a mutiny vandall LTD. The only problem is I have hyperlite system bindings. So the screws aren't really fitting into the board. Does anyone know what type of screws work best for the vandall LTD. I know its a super rare board but thats made it hard to get a straight answer. I used screws from a ronix one boot setup and those work until I get big air and land in the flats and then the screws just break off.

(wazzy) · (wazzy) **Join Date: Nov 2001** 07-13-2015, 9:49 AM

Sounds like there is an issue with your board.... maybe you should sell it to me & buy yourself a new one...

(still kicking my self for now getting one)

(billyjodonjimbo)

Sounds like you need M6 hardware if ronix hardware worked.

(MattWake22) · (MattWake22) **Join Date: Jan 2013** 07-13-2015, 10:29 AM

Yeah I purchased some today. Im just hoping it doesn't pop out again. Is there anyone from their company I can get in touch with?

(Jmaxymek) · (Jmaxymek) **Join Date: Feb 2012** 07-13-2015, 10:41 AM

I'm fairly certain they ran M6 hardware. It could just be the depth of the screws, I'd recommend ordering some Hyperlite System hardware.

(MattWake22) · (MattWake22) **Join Date: Jan 2013** 07-13-2015, 10:46 AM

Tried that, didnt fit. Im taking the whole set up to a hardware store and hopefully will figure it out that way. Thanks guys if you have any other ideas let me know.

(jburbo) · (jburbo) **Join Date: Sep 2007** 07-13-2015, 10:55 AM

Go to Home Depot and pick up some M6x1.0 stainless hardware. And maybe a couple plastic washers, in case you need them. Worked for me