Tower Clamps

byazn 05-21-2003, 8:19 AM

I am going to make a light bar and I was wondering if any one has any good ideas of mounting to the tower??? Any suggestions???

Thanks

Brandon

(blastmaster) · (blastmaster) **Join Date: Aug 2001** 05-21-2003, 2:39 PM

wakeair sells them pretty reasonable

(melvinator) · (melvinator) **Join Date: Apr 2001** 05-21-2003, 8:01 PM

try this site http://www.chassisshop.com/npbm.html

(supraman) · (supraman) **Join Date: Jan 2002** 05-21-2003, 10:18 PM

If you want CHEAP ones, check this out. About $5 each.

(wakescene) · (wakescene) **Join Date: Feb 2001** 05-22-2003, 8:11 AM

I have to chime in here...
I would think that the ones that Matt (Supraman) just posted woudl be one of the better alternatives.
- Easy to add to a box
- Easy to Mount to tower/Pylon
- Single person operation for most boxes
- Cheap/Lightweight/Stong/Proven in Industry

Any other thoughts???

KG

markb 05-22-2003, 8:20 AM

The pro-clamp on the following page is more expensive but looks more rugged and will fit 2" pipe.

http://www.csnl.com/en-us/dept_273.html

ridexstar 05-22-2003, 10:19 AM

Fluidconcepts sells clamp that fit your exact tower size. Then just match the bolt pattern. http://www.fluidconcepts.net

(sbayboarder) · (sbayboarder) **Join Date: Apr 2003** 05-22-2003, 10:28 AM

also check out http://www.rynogear.com. then let us know who you choose and why

(jroyal) · (jroyal) **Join Date: Jan 2003** 05-22-2003, 11:42 AM

I have to recommend the ones from Prowerks as well http://www.chassisshop.com/npbm.html

I used them on my tower speakers and they worked great. They fit snug. I get no movement even though I fold my tower each time I use it.

Here's a few photos with the tower folded down.

Front

(Message edited by jroyal on May 22, 2003)

(Message edited by jroyal on May 22, 2003)

(monstertower) · (monstertower) **Join Date: Mar 2003** 05-22-2003, 7:57 PM

Jeff,

Those look really good. I love the pro-werks products and have some on my desk now for some of my future projects. How did you attach them to the cans?

Bill

(jroyal) · (jroyal) **Join Date: Jan 2003** 05-23-2003, 6:55 AM

Bill, Thanks for the compliment.

I had to replace the bolts that came with the clamps with longer ones. I drilled a hole through the PVC and put a washer, lock washer, and bolt on there. Then I tightened them up.

The only thing about this is you have to mount the can on the tower, then put the speaker in. But, it works really well. The Pro-werks fit great and look great too. I get no movement at all.

I'm working on some instructions with some photos for your http://www.diytowers.com site. I'll e-mail them to you when I get done.

(Message edited by jroyal on May 23, 2003)