What is the prop size for the OJ CNC Wakeboard Pro

I recently purchased a 2005 Supra 21V and it has the original prop on it. I would like to get the CNC Wakeboard prop, but am unsure of the size to get for this boat. If anyone has an idea, please let me know. Thanks

ask eric johnson he is a great guy and will hook you up with everything you need to know about props.

OJ makes the XMP Edge inmany sizes for ballast heavy boats. The 14.25x14 and the 14.25x14.5 I think are the most common. Call Eric at OJ and he will put you on what you need. ACME's version is the 1265 (I think at least for the MCs). People will vouch for both companies on these props I have heard both companies will work with you to make sure you get what you want. There is plenty of information on this site, so do a search or better yet call and talk to the companies and tell them what you want to accomplish with a new prop.

Matt,
Just checked mine and it is 14 x 14.25 OJ Wakeboard prop.

Diggs- Do you have a 14 x 14.25 or a 14.25 x 14?

hmm. i think it is the 14.25 x 14, but it is just the standard wakeboard prop you can order with your boat through any supra or moomba dealer in early 07.....
sorry props definitely aren't my specialty, but I know it was a big difference over the older props if you plan on running a lot of weight..

Tyler

Check this link out from OJ Props: http://www.ojprops.com/site/OJProps_applicationguide.pdf

I beleive you are referring to the 466--14.25 X 14 LC .090 1 1/8" 1.5:1

I am going to try to contact Eric at OJ and go from there. Thanks guys for the input.

yep i think you are correct... here is what supra calls the option upgrade and any supra dealer should be able to confirm, but I think you are spot on. good luck and you will notice a big difference.
CNC Wakeboard / Altitude Prop

I run the XMP Edge 14.25x14 0.110 on my XLV with +/- 2700 in ballast. Great prop...