Fins for The Churn by Butter Boards

Hi guys and gals- Need some fins for my new board. Said to need 2- 4 1/2" fins that will work with drop in fin boxes, any suggestions? I tried to look up their website (tritonsports.com) with no luck. Thanks for any help. See ya.

Never heard of a drop in fin box. The last time I looked at a churn I swear they were Future Air's.

Does the box have a single set screw at the front of the box inline with the slot for the fin base and the back of the box will look like it has a "dowel" running perpendicular to the length of the box that the fin base hooks into? If that is the case, just check for Future's fins online.

I looks to me that the fins have a single set screw (like a 1/4-20) right in the center of the fin. The screw/bolt comes from the top through the board and then into the fin.... does that make sense? If not, I will take a pic if you think you might know where to find some. Thanks a ton, seriously, thanks. RYan P.S. Ever rode that model, I think it is a 2005?

Yeah, shoot me a picture if you can. The 1/4-20 isn't a Future Air. It sounds like the LF side cupped fins attachment almost.

DUH! Sorry R.D. that has to be REDX. Let me find their website.

www.redxfins.com

Go to the system page and see if that looks like the way your fins are set up.

Thanks bro- those look like the ones...now just to get a pair. Thanks again. RD

I have been hunting for the same fins for my butter board and havent had any luck. The redx fins didn't fit. What fins worked for yours?