Slingshot Binding sizing

I wear a 9.5 in Adidas and Reebok (all i got for sneaks right now). Should I go with a 9 or 10 in the PB's?

Better slightly too large than too small I guess, but you don't have a shop you can try them on at?

I would go 9.... if CT boots are too big you can jam your toes into them when you land, and it hurts like hell.... plus with the liners after you heat mold they form to what you need

I usually wear a 13, sometimes a 12.5 and got Size 12 D2's and they work perfect....tight, but they do not hurt... even if you get the wrong size I would be willing to bet they would exchange them for a different size, they are great like that

no local shop....looking @ BBB

i would go with 10.5 or 11

I wear a 9.5 st shoe and went with 11 D2's

I agree with zach and pacifichigh they fit really small I wear a 11.5-12 shoe and I needed 13's in the d2's

Get 10.5 or 11

go with 10's

i wear 10.5 shoe and got size 11 d2 boots.

i thought the 10 was too tight

later i thought i had slightly too much room in the toe box of my d2 boots and just put an after-market footbed under the liner and BAM! size 10.5 personalaized d2 boot. Worked for me! ;)


so, with respects to MY PERSONALL experience i would say 10 for you

Thanks Guys, think I'll go with the 10

Good call. They run a tad small. I wear 9's... and just got a pair of size 9 D2's...and they are snug.