Boarders Paradise custom sacs

(twakess) · (twakess) **Join Date: Mar 2002** 08-29-2005, 4:28 PM

Has anyone had any custom fat sacs made by Boarders Paradise? I was told they were made very well any input would be helpful.

(kybool) · (kybool) **Join Date: Aug 2004** 08-29-2005, 4:48 PM

I have three that I got this year. They are holding up well and I am very happy with them. No complaints so far.

(sacdeep) · (sacdeep) **Join Date: Aug 2001** 08-30-2005, 1:35 AM

Yeah squid I got a pair they are nicely made to whatever size you want and you can put the fittings where ever you want and custom colors too. Not a bad price for two was $160. The only bad thing is they use the regular fatsac fittings that tend to leak. But I used a male to male hose fitting and hose clamped it and that solved that problem

(twakess) · (twakess) **Join Date: Mar 2002** 08-30-2005, 8:49 AM

Thanks guys for the info.

(nauty) · (nauty) **Join Date: Feb 2004** 08-30-2005, 9:52 AM

I bought some earlier this year to match the dimensions of the Gravity Games sacs that Supra's use. Total cost including shipping was $286 compared to $700 for the GG sacs.

They are holding up great. Like sacdeep said, they use the regular waterbed fittings. However, I got around this by finding some plumbing fittings at the hardware store that go inside the sac fitting rather than screwing over it.

I put a clamp on the outside of the sac fitting to make a tight seal around the plumbing fiting that goes inside the sac. The quick connect fittings on my ballast system connect to the fittings I attached to the inside of the sacs. It works like a charm with no leaks what so ever and I saved $400 to boot!