Tower mirror for Supra's Progressive?

(redsupralaunch)

So I have had a tower mirror on my boat since 2004 and did not have to mess with it every time I cover up the boat. Anyone sell a tower bracket for this tower yet?

(tyler97217) · (tyler97217) **Join Date: Aug 2004** 05-09-2011, 12:33 PM

I was told that Samson was going to build one last year and they took some measurements of my 2010. I have heard nothing more since. I have just gotten use to the windshield mirror. Call Samson and put some more heat on them. I know Scott took measurements and intended on doing it.

(Kjkimball) · (Kjkimball) **Join Date: Mar 2011** 05-09-2011, 6:25 PM

I have a 2011 launch 242 with the progressive tower. I went with this mirror:
http://www.ptmedge.com/mobile/default.aspx#C44

We have the 100 since that was the only one available at the time. I'd go for the 200 now to have a wider field of view. It is ultrahigh quality, rock steady and folds down to allow the cover to go on without removing the mirror.

Kevin

(tyler97217) · (tyler97217) **Join Date: Aug 2004** 05-09-2011, 7:12 PM

How does it hook on Kevin? Can you post a pic of yours with it on?

(Kjkimball) · (Kjkimball) **Join Date: Mar 2011** 05-10-2011, 3:39 AM

Quote:

Originally Posted by tyler97217

How does it hook on Kevin? Can you post a pic of yours with it on?

The base clamps to the windshield frame over the entire width of the base. It has rubber inserts inside and a lip on the upper and lower base parts that wraps past the edge of the frame to make sure it does slip off. The 2 sockethead cap screws seen on the bottom of the base are used to clamp the 2 halves together. The knob on the back is the lock to hold it in the 3 positions, up, straight back ( not shown), and all the way down inside.

Kevin

(tyler97217) · (tyler97217) **Join Date: Aug 2004** 05-10-2011, 7:30 AM

Oh I thought you had the tower mirror clamp..... I think that is what we were looking for.