Articles
   
       
Pics/Video
       
Wake 101
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through May 29, 2009

Share 
Reply
 
Thread Tools Display Modes
Old     (begarrett)      Join Date: Apr 2007       05-19-2009, 7:51 PM Reply   
I have a 2007 Moomba Mobius LSV with the 1200lb gravity III ballast. I was wanting to upgrade the ballast yet keep the original plumbing if possible. Anybody know any solutions?
Old     (jon_a)      Join Date: Feb 2003       05-19-2009, 8:29 PM Reply   
I run 550's on each side of the engine and the stock ski locker 400. I also either put a 750 on bag on the bow cushions or if I want to stay hidden, run an integrated bow sac under the bow cushions. Run the wakeplate between half and 3/4 of the way down at 24 mph.
Old     (craig_f)      Join Date: Feb 2008       05-19-2009, 8:33 PM Reply   
Just buy bigger fly high sacs with the quick disconnect, and make sure they fit in the bow and side lockers. If you want to go all-out I think you can order custom sacs from fly high.
Old     (river_bum)      Join Date: Dec 2008       05-19-2009, 8:34 PM Reply   
I have an 01 mobius v, any suggestions for upgrading from stock hard tanks.
Old     (tailgate)      Join Date: Apr 2007       05-20-2009, 7:39 AM Reply   
I have an 08, here is what you can do:

The 750 fat sac will fit in the back of both rear compartments. The drain hose will work, but the fill hose will need to be made longer, or what I did was to route the hose to fill from the front of the bag, I had to cut a "mouse hole" in the front separator, but it works good,

I took the 2 400's from the back and put them stacked in the walkway towards the front and fill manually.

Throws a great wake, but I might be able to use more weight up front, or just let a little out the back.
Old     (hawk22)      Join Date: Jul 2006       05-20-2009, 9:20 AM Reply   
My cousin had an 06 and he just swapped out the rear bags for the flyhigh 750s, worked out realy nice.
Old     (formfunction)      Join Date: Jun 2008       05-20-2009, 10:56 AM Reply   
I have the 750's in the rear and we only fill them about 500 or so,then we run the factory 400 in the front and another 400 in the walkway.Works great about 22.5 and 75
Old     (04outback)      Join Date: Jul 2007       05-21-2009, 11:22 AM Reply   
check out www.wakemakers.com
they have a piggyback system.. you can easily add an integrated bow sack by tapping into your front sac. I want to do this. With my 06 LSV. I have 750s in the rear but they overload the rear of the boat without a ton of extra weight up front.
I prefer my boat with 400's in the rear, 400 center full and extra 600 on the front seats...

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 2:28 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2019 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us