Articles
   
       
Pics/Video
       
Wake 101
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through August 06, 2007

Share 
Reply
 
Thread Tools Display Modes
Old     (midlifecrisis)      Join Date: Feb 2007       07-27-2007, 4:02 PM Reply   
Any creative minds out there? Looking for ideas to hold my Ipod. Prefer not to drill any holes. This thing gets used alot so something that will hold up to abuse would be appreciated. Pics would be helpful too!! Thanks guys.
Old     (tuffenuff)      Join Date: Aug 2006       07-27-2007, 10:06 PM Reply   
I got a folding billfold type holder and velcro'ed it down below my console. easy in and out and keeps dry too.
Old     (pdqwrx)      Join Date: Jul 2007       07-28-2007, 12:34 AM Reply   
How about just using Velcro?
Old     (committed)      Join Date: Jul 2005       07-28-2007, 9:57 AM Reply   
I use a cellphone holder, made for the cup/drink holder. The "cellphone" holder is adjustable to work with many different phones, which makes the Ipod fit perfectly. It's base sits in the drinkholder and walla. I got mine at Napa, but I have seen them at your full service car washes as well, and most likely any Walmart or Target would carry them as well. It works great.

(Message edited by committed on July 28, 2007)
Old     (big_xstar)      Join Date: Nov 2004       07-28-2007, 10:09 AM Reply   
Go to ebay and search cell phone holder
I have the one that is expandable and has
a
suction cuip to stick it to the windshield
and has a flexible arm to adjust
$10.00+shipping
Old     (newty)      Join Date: May 2005       07-28-2007, 5:01 PM Reply   
http://www.proclipusa.com/choosecountry/choosecountry.aspx
Old     (sbilyeu)      Join Date: Jul 2007       07-28-2007, 7:48 PM Reply   
I like Velcro the best. Kinda cheesy but works good.
Old     (dubsac)      Join Date: Mar 2006       07-29-2007, 7:33 AM Reply   
I have an Otterbox iPod holder with a suction cup mount. It is totally waterproof and the mount works really well - sticks it to the windshield and you can adjust the position any way you like.

http://www.otterbox.com/
Old     (etakk7)      Join Date: Apr 2006       07-30-2007, 7:59 AM Reply   
I've got the one that fits in a cupholder (an arm with a holder comes up from the cupholder). It stays in one place even in rough water. Completely temporary, couldn't be happier.
Old     (midlifecrisis)      Join Date: Feb 2007       07-30-2007, 8:27 AM Reply   
Thanks guys. I tried the velco route but the AZ heat turned the adhesive into goo. I like the windshield idea but I would like to keep the Ipod near my knees or at dash level.
Old     (twobills)      Join Date: Feb 2007       07-30-2007, 8:31 AM Reply   
I second the Proclip linked above. I used Velcro first but the hot sun made the stickum melt and it made a mess. I also tried the suction cup, but it would always seem to fall when I was trying to drive.

I just drilled four small holes and it's done.
Old     (bamacpa)      Join Date: Aug 2006       07-30-2007, 9:29 AM Reply   
I have been considering one of these.

http://welovemacs.com/ip4gstforcar1.html
Old     (buzz_grande)      Join Date: Mar 2004       07-30-2007, 9:48 AM Reply   
Here is mine. Just a simple Belkin mount, bolted onto a custom-made (pretty simple) bracket that fits under the dash switch plate.

Upload
Old     (rodmcinnis)      Join Date: Sep 2002       07-31-2007, 3:59 PM Reply   
My Ipod holder are the hands of the observer.....



Rod
Old     (detonate69)      Join Date: Apr 2001       07-31-2007, 4:04 PM Reply   
Proclipusa brackets are high quality. I've been using them for years in my cars and they are the best hands down, imo. I haven't yet adapted one to fit into the boat but will be shortly.
Old     (rooter)      Join Date: Oct 2006       07-31-2007, 5:56 PM Reply   
got this for mine. suction works very very well.

http://www.boxwave.com/products/mobilemountingkit/index.htm
Old     (hooterz)      Join Date: Jul 2006       08-01-2007, 10:29 AM Reply   
This is the one I use, It's made by bracketron. It is very similar to one that Robo has and is available at Best Buy and is about $10.00 cheaper.
http://www.bracketron.com/xmain/products.php

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 10:45 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us