Articles
   
       
Pics/Video
       
Wake 101
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through November 04, 2009

Share 
Reply
 
Thread Tools Display Modes
Old     (richy_m)      Join Date: Sep 2008       10-18-2009, 9:34 PM Reply   
just wondering what prop you guys are running, is any1 using an OJ 14.25x14??? considering putting this prop on a 09 210 will this work?
Old     (innov8)      Join Date: May 2005       10-19-2009, 8:47 AM Reply   
Yes, that is a great prop, I have many customers that are using OJ 14.25 x 14 on Nautiques.

I prefer OJ's myself.
Old     (nauti4life)      Join Date: Sep 2008       10-19-2009, 1:36 PM Reply   
Nautique uses a 13.50x14.25 for the team power prop on the 210's. I was told that the 14.50x14.25 could not be used. The prop would come too close to the hull and cause blistering/burns in the glass. I don't know if a .25 smaller would work. I would call OJ, Acme or Correct Craft. Good luck.
Old     (innov8)      Join Date: May 2005       10-19-2009, 2:25 PM Reply   
Here is OJs application guide, page 3 is for Correct Craft.

http://www.ojprops.com/resources/applicationguide.pdf
Old     (nauti4life)      Join Date: Sep 2008       10-19-2009, 2:40 PM Reply   
Looks like OJ needs to update. It shows Nautique as a right hand rotation. That is pre-2007. The 210 had a hull change that year as well.
Old     (innov8)      Join Date: May 2005       10-19-2009, 2:52 PM Reply   
They have 14.25x14 LH for the new 210 hull, we have many customers using this prop with not 1 problem ever.
Old     (nauti4life)      Join Date: Sep 2008       10-19-2009, 3:46 PM Reply   
Hey Jeff-You haven't seen cavitation blisters or burns in the hull above the prop? I was told by Acme and Nautique not to use the 14.50 for that reason. I know you can use that prop on all other Nautique v-drive models. I was told not to on the 210. Can you measure how much room is between the top of the prop and hull of one of those 210's? Looks like you have 2 in your showroom. Nautique does not offer the prop you are talking about. What prop do you order with your boats?
Old     (innov8)      Join Date: May 2005       10-19-2009, 3:59 PM Reply   
Not running the 14.50 running 14.25

I will call our other store and see whats up.
Old     (innov8)      Join Date: May 2005       10-19-2009, 4:08 PM Reply   
Well according to our other store all "Super Air" Nautiques are coming in with the ACME 14.25x14.
Old     (nauti4life)      Join Date: Sep 2008       10-19-2009, 4:14 PM Reply   
Jeff-I pulled up Acme's site and they don't show a 14.25. Maybe Acme needs to update their site as well.

http://www.acmemarine.com/prop-list_ski-boat.php
Old     (chpthril)      Join Date: Oct 2007       10-19-2009, 6:28 PM Reply   
So, how many more times is the 14.25 going to be recommended, and how many more people are going to post up that the 14.5 is not the correct prop for a 210 Those numbers after the "." mean something!
Old     (richy_m)      Join Date: Sep 2008       10-20-2009, 1:17 AM Reply   
so i'm gettin the impression that the OJ 14.25 will work but not the 14.5??
Old     (johnsvt)      Join Date: Dec 2006       10-20-2009, 7:49 AM Reply   
call Eric at OJ I am sure he knows the correct answer
Old     (innov8)      Join Date: May 2005       10-20-2009, 9:18 AM Reply   
Yes Richard Do Not use a 14.50, but 14.25x14.00 is ok and preferred for a boat with lots of extra ballast, if you are not going to add a lot of weight, then no reason to run a 14.25 IMO.
Old     (lion90)      Join Date: Jul 2009       10-20-2009, 3:32 PM Reply   
Jeff (innov8),

You might want to clarify what 'all "Super Air" Nautiques" means.

I know for a fact that my 230 (and a couple others) came with the Acme 1235 prop which is a 14.5 prop.

I know this thread started about the 210 but there are other "Super Air" Nautiques than the 230 and your comment might be misinterpreted.

No harm, just picking nits. :-)

http://www.wakeside.com/product/boat/accessories/boat_propellers/1235+-+acme+4+blade+propeller.do
Old    ejojprop            10-21-2009, 7:16 AM Reply   
Either our 14.25 X 14 or 14.25 X 14 will work well, depending on the amount of ballast added. Our 14.25 X 14 was used to test the first LH rotation boats as the other prop builder did not have any in that size/rotation at the time.
Old     (innov8)      Join Date: May 2005       10-21-2009, 8:23 AM Reply   
I will clarify Dave.

You can run ACME or OJ 14.25x14 on 07 new hull and later 210's.

I never said you could not run an Acme 14.50x14 on a 230, just not on a 210.

I see what you are saying with my Super Air comment though and I agree, sorry for any confusion.
Old     (lion90)      Join Date: Jul 2009       10-22-2009, 10:03 AM Reply   
Yeah, I wasn't trying to pick on you. Just making sure that someone else didn't read it the way I did initially until I realized the topic again.
Old     (innov8)      Join Date: May 2005       10-22-2009, 12:00 PM Reply   
Your post was a good post David, I totally agree with your post, I did not feel like you were picking on me at all

Its all about getting the correct info out to everyone!!

(Message edited by innov8 on October 22, 2009)
Old     (jbwake)      Join Date: Jun 2004       10-23-2009, 2:03 AM Reply   
We just got our 2010 210 Team today and it came with an ACME 1579 which is the same 13.50 x 14.25 as last year.

I was hoping you were right about all Super Airs coming with a 14 x 14.25 as I was keen to give it a go but unfortunately not....
Old     (innov8)      Join Date: May 2005       10-23-2009, 8:55 AM Reply   
Well then its a dealer thing, our 2010 210's have the 14x14.25, we must just order our 210's with ACME 1433.

I have been behind many with the 1579 and the 210 does fine with this prop.

What motor did you get John Zr6 or 343?
Old     (jbwake)      Join Date: Jun 2004       10-23-2009, 3:42 PM Reply   
That's a bit of a drag i didn't know there was an option. I was interested to try the bigger one to see if there was any difference.

We got the ZR6. It has the same engine and prop as our 09. We have no problem with the performance but if there was something different/better we were keen to give it a go. All other specs are the same for the 1433 other than 0.50 larger diameter so it would be interesting to see if there was a noticeable change in performance.

Now to learn how to use this LCD screen :-) Today should be the first day on the water. We are in Australia so it's getting warmer here, not colder!
Old     (innov8)      Join Date: May 2005       10-23-2009, 3:54 PM Reply   
Congrats on your 2010 210 great choice!!

With the zr6 in a 210, no need for the 14x14.25, boat has plenty of pull to get out of the water, even loaded down.

We order most of our 210's with the 343.
With the 14X14.25 the 343 gets out of the water better.

Enjoy your new boat!!
Old     (migs)      Join Date: Aug 2006 Location: SF Bay Area       10-25-2009, 10:41 AM Reply   
Jeff - the 14X14.25 - is what model # for ACME??? Is that the 1579 or is that the 1433?

whats the difference(in performance) between the 1579 & the 1433????
Old     (richy_m)      Join Date: Sep 2008       10-25-2009, 7:32 PM Reply   
hey jeff, do you mean it is okay to use a 14.25x14 sized prop? you are talking about the 14x14.25 is it the same prop? just clarifing, we still haven't made a decision to use it as we still not sure if it is going to work?? It will be an OJ not a ACME.
Old     (justsan)      Join Date: May 2009       10-25-2009, 8:24 PM Reply   
My 07 210 came with the 645 ACME, I load the boat up and wanted to get out of the hole quicker so I called ACME -since I do a lot of riding at the river they got me the 1465 -sd its just like the 1579 but thicker for the debris that float around in the river. Prop works great, no complaints.
Old     (innov8)      Join Date: May 2005       10-26-2009, 9:01 AM Reply   
"Either our 14.25 X 14 or 14.25 X 14 will work well, depending on the amount of ballast added. Our 14.25 X 14 was used to test the first LH rotation boats as the other prop builder did not have any in that size/rotation at the time"

This quote is by OJ props, so if you want to run an OJ prop, then its says in his post OJ 14.25x14 is ok.

This is the prop we prefer and have used OJ 14.25x14.

(Message edited by innov8 on October 26, 2009)
Old     (richy_m)      Join Date: Sep 2008       10-26-2009, 6:20 PM Reply   
thanks jeff, just clarifying, we will be putting it on this week hopefully no issues will arise!

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 10:08 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2019 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us