prop help 06x2

(no_tools) · (no_tools) **Join Date: Apr 2007** 10-28-2011, 2:49 PM

hey folks. i have a prop that needs to be replace due to a object that someone hid under water. lol
its a 13.7x 17. is there a place that sells refurbished ones? or a good place to buy one? the boat is a 06 x2 with a mcx 350. my local shop is 2 hours away. any help would be great. thanks

(rgardjr) · (rgardjr) **Join Date: Jan 2010** 10-29-2011, 7:42 AM

Tons of these props show up on Ebay. OJ can repair, but you can usually find someone local that can fix it as well. I didn't like that prop on my 2006 MS 200 once we started adding weight.

(h20king) · (h20king) **Join Date: Dec 2009** 10-30-2011, 5:33 AM

I have an almost new OJ 13.7 x15.5 I would be willing to make you a deal on.It was only on my boat for about an hour.The clearance between my hull and the prop was to close which would cause cavitation so I pulled it off and went back to ACME

(hookedonboardin) · 7:05 AM

Since your looking I would upgrade to a better prop. Like the newer 14.5 X 14.25 ones from acme or an in equivalent. Much better wakebording performance

(mattscraft) · (mattscraft) **Join Date: May 2009** 11-03-2011, 7:04 AM

I have an '09 X2, the stock prop is now OJ - 14.75X15.5. Prop works very well when weighted for boarding and surfing, top end suffers some, best I can get is about 42mph unloaded, down hill with a tail wind, lol. WOT will be about 5000 RPM with the MCX. I would like to try the new 5 blade from OJ next to see if I can improve fuel eco.

(kskonn) · (kskonn) **Join Date: Mar 2011** 11-07-2011, 2:41 PM

X2 on the Acme. I put that prop on my X2 and on my X30, best prop I have ever had. Cleans up the wake, not sure how but it does.