Installed new wind dam yesterday in the V226

(ReSession) · (ReSession) **Join Date: Apr 2010** 04-08-2012, 5:31 AM

Over the winter, I ordered a wind dam kit from Supreme for my V226 and was finally able to pull it out of storage this week (of course it's gonna snow this week now!)

I found a good thread from h20king on CenturionCrew, and simply followed his steps.

To be sure I didn't crack the gel coat when drilling, I used painter's tape over the hole AND ran the drill in reverse (never heard of this before but it worked great!).

(h20king) · (h20king) **Join Date: Dec 2009** 04-08-2012, 5:43 AM

Greg looks great. Glad one of my threads helped you out.

(ReSession) · (ReSession) **Join Date: Apr 2010** 04-08-2012, 6:17 AM

Thanks h20king!

Quick question - what do you guys store your wind dam in when it's not in-use? I'd like to keep mine scratch-free and looking at padded art portfolios/similar padded pouches but not finding an inexpensive solution...any ideas?

(h20king) · (h20king) **Join Date: Dec 2009** 04-08-2012, 7:23 AM

My kit came with a sunbrella case that snaps in the rear locker on the divider wall.It would be easy enough to make one if you know someone that sews.

(antoddio) · (antoddio) **Join Date: Dec 2006** 04-08-2012, 9:11 AM

Very nice. Where did you order that from and what price? I'm looking for one for my v232.

(cragrat) · (cragrat) **Join Date: Mar 2012** 04-08-2012, 10:43 AM

That is SWEET! Guess I know what my next purchase will be!

(ReSession) · (ReSession) **Join Date: Apr 2010** 04-08-2012, 2:26 PM

Thanks guys, I ordered it through my dealer (Semper Speed and Marine) and believe it cost around $225 for the kit, which took about 2 hours to install (taking my time to triple check the measurements).