Where to buy these?

(twelve02) · (twelve02) **Join Date: Aug 2010** 07-05-2011, 9:40 PM

Does anyone know where I can get just the plastic nut that holds the breaker onto the panel? I called few places and they said they only come when you buy the breaker.

(moto817) · (moto817) **Join Date: Jan 2011** 07-06-2011, 10:46 AM

You can get a new breaker for $4.79 from west marine , and probably cheaper online....I would just buy a new one

(twelve02) · (twelve02) **Join Date: Aug 2010** 07-06-2011, 12:45 PM

Yeah thanks, I know I can get the breakers, but don't need new breakers, just the plastic knurled nuts that hold on the breakers. Need a few of them.

(Jeff) · (Jeff) **Join Date: May 2010** 07-06-2011, 1:09 PM

I might have some (at most 3) at home. I used the rubber boots instead of the included plastic nuts when I installed my ballast system. I may have thrown them away though so I'll have to check when I get home.

This is what I used instead and they have an integrated nut:
http://www.jmsonline.net/push-button...r-blu-4137.htm

Gives it a more finished look. It doesn't say but I think there were 2 in each pack.

(twelve02) · (twelve02) **Join Date: Aug 2010** 07-06-2011, 2:31 PM

Hi Jeff, That looks like a good idea too. If you don't still have yours, then maybe I'll go ahead and pick up a few of those.

Thanks,

Tom

(Jeff) · (Jeff) **Join Date: May 2010** 07-06-2011, 3:53 PM

Well, apparently I threw them away. Sorry.

(mach90) · (mach90) **Join Date: Jun 2009** 07-06-2011, 4:54 PM

Hey Tom-

I might be able to get you a few ... when I had my DXII I was missing some and I finally found them at a wrecking yard! Don't know what ya'll have down there in SoCal, but I'll check for you when I get back to NorCal tomorrow.

Dan

(twelve02) · (twelve02) **Join Date: Aug 2010** 07-06-2011, 5:49 PM

Hey Dan, thanks. I left you a message too about tonight.

-Tom