Can someone let me know where the overflow lines for the rear hard tanks are located? Pics would be great. i want to hook them to fly highs and then have the fly highs hooked to the overflows. Im open to all suggestions on how to plumb in the sacs but dont want to spend the $ on the flyhigh system. I already have all the bags. Thanks!
one way is to take the port vent line directly from the hard tank to the bag then vent the bag back out the port vent outlet ditto for starboard and KGB
or
purchase the valves from Fly High
or
some would eliminate the port and starboard hard tank and plumb into bag
or
buy two or three new pumps with switches and plumb into bags
last one is the preferred way to me
Thanks Snork, does the KGB only have the one vent/overflow on the starboard side? There's only one through hole on the port passenger side and you said that was the overflow/vent for the port side rear tank.
Pay careful attention to how you plumb the forward sacks. It needs to be one exactly like on the most current wakemakers schematic otherwise the bags won't fill evenly. You can't just daisy chain them off of eachother.