Speaker Wiring Thru Tower???

tlaabs 07-03-2003, 8:14 AM

Need some help pulling speaker wire through my tower. I know there was a thread on here recently, but can't find it. Any helpful tips would be appreciated.

(typhoon) · (typhoon) **Join Date: Jul 2001** 07-03-2003, 8:15 AM

string and a shop vac

(zo1) · (zo1) **Join Date: Aug 2002** 07-03-2003, 8:52 AM

String and shop vac works well... If that fails for you you can also try some small wire, say 18-20G, fish it on down and grab with a pair of needlenose pliars...

(jro) · (jro) **Join Date: Sep 2002** 07-03-2003, 9:12 AM

I used a roll of sauter (SIC). I tworked first try after messing around with string and a shop vac for an hour. The string kept getting tangled and gooed up by the oil inside the tower

(trace) · (trace) **Join Date: Feb 2002** 07-03-2003, 10:46 AM

uae an electrician's fish tape, and deburr the inside of the holes really well before you fish the wires.

(trace) · (trace) **Join Date: Feb 2002** 07-03-2003, 10:47 AM

err... "use"

(liveoz) · (liveoz) **Join Date: May 2002** 07-03-2003, 3:30 PM

Something that was on the other post that is important is to use real light string like dental floss at first (easier to suck up)

Also, if you are using monster cable or somthing similar, the cables stick to each other and can be very difficult to pull. I used binding slime and it was 1000 times easier.

whitechocolate 07-03-2003, 4:44 PM

Trace "Is the Man" I second his method! Shop Vac and a string, Thats a great idea, if your name is Mc-guy-ver