08 LF screw holes

(dooie) · (dooie) **Join Date: Feb 2007** 01-30-2008, 10:21 PM

hey what's the go with the 2008 liquid force screw holes? i noticed on the lyman on the inside there is four and on the out side there is three.

(stephan) · (stephan) **Join Date: Nov 2002** 01-30-2008, 11:51 PM

Pretty sure it's for the same reason that CWB did the very same thing. They have switched to a 6 inch binding plate from a 8 inch plate. You therefore don't need as many inserts to cover the spectrum of stance ranges.

(evank) · (evank) **Join Date: Nov 2007** 01-31-2008, 1:14 PM

will ronix or hyperlite bindings be compatable?

(stephan) · (stephan) **Join Date: Nov 2002** 01-31-2008, 3:01 PM

Yeah they should be.

(trickyboarder08)

yes, but they wouldn't be able to go as far apart or as close together as the 6in. binding plate.

(2007_x2) · (2007_x2) **Join Date: May 2007** 01-31-2008, 6:58 PM

the reson is to get a wider stance

(wakemitch) · (wakemitch) **Join Date: Jun 2005** 02-01-2008, 9:38 AM

they dropped the inside thread on the out side set. all bindings will work with it.

benj_t 02-02-2008, 10:11 AM

yea the 08 bindings have a new plate. i was wondering the same thing before i got it. but even with bindings with the old plate its still fine. before i got my 08 shanes, i rode it with the 07 watsons and it was fine. now its a realll wide stance with my shanes and i like it like that