Well a couple weeks ago I finally got my 99 SAN back from getting the trailer redone, tower powder coated, new interior and tower speakers installed, perfect pass installed, new skin on the rear deck, and a few other little things.
All in all I think it turned out pretty good. It took a little bit longer than I planned on, but the guy that did it all gave us a killer deal.
I have taken the boat out a few times and I don't think the ballast to the rear tanks is working. When I hit the fill switch I don't hear any pump going so it is either bad wiring somewhere, or a bad pump. The ballast setup on this thing is kind of weird.
Now to my questions... I want to add a three bag system (possibly four). two in the rear compartments, one in the ski locker, and one possibly up front.
1) Should I just tear out the stock system and replace it with jabsco pumps? It looks like the pumps in the existing system are in a tough place to get to, what would be the procedure of getting these pumps out?
2) If I took out the hard tanks and aerator pumps, can I keep all of the original plumbing and just add a jabsco (w/switches) and sacs?
3) If anybody has any other suggestions on what would be the best setup and what has worked for you, please let me know!
Thanks a lot guys. Here are a couple before and after pics of the boat...
Hybrid Mode
