So I ordered my Rev410s yesterday. I had planned on going with a pair of SYN2s to power but my dealer did not have any instock and suggested I go with another amp.
They are suggesting the RF t1000-4ad
http://www.rockfordfosgate.com/produ...?itemid=116206
They are saying it's way under rated and runs super cool and I would be able to run a single amp bridged for both speakers. I am not 100% sold though....
They installed all RF amps in my first install - In boats running off a T600-4 and the towers running off another t600-4 and then the 3 L5 subs off a T1500. Since I am running 3 pairs of inboats we sometimes have an over heat issue on the inboat since one channel is at 2ohm..
I was also considering a pair of the JL HD750/1... Would be a tiny bit more but I think I would be assured more power to the speakers...
http://www.jlaudio.com/hd750-1-car-a...plifiers-98220
This will also leave me with a spare t600-4 no matter what which I could put on one of the subs I guess and split the 1500 between the remaining 2. Could split the interior up so I am not running 2ohm.. If I could find room add another pair of JLs and use that amp or ditch it and sell it.
Any other suggestions on the amp selection for the 410s though? I would like to get it figured out today/tomorrow I guess.
Threaded Mode