gelcoat oxidation

(brad_m) · (brad_m) **Join Date: Apr 2007** 05-01-2007, 4:38 PM

Any suggestions on getting oxidized gelcoat shiny again?

(olskooltige) · (olskooltige) **Join Date: Mar 2007** 05-01-2007, 4:58 PM

3M rubbing compund for fiberglass and a rotary buffer. Follow with 3M finesse it or Diamond Cut and the buffer. Apply wax.

(srh00z) · (srh00z) **Join Date: Jun 2003** 05-01-2007, 5:44 PM

If the above doesn't work, you can wet sand with very fine grit sandpaper, you can buy 1500 grit and maybe even 2000 grit at AutoZone and PepBoys. Just keep the surface wet and lightly sand, then wash and wax.

(market_open) · (market_open) **Join Date: Apr 2007** 05-01-2007, 6:07 PM

http://www.wakeworld.com/MB/Discus/messages/65921/373787.html?1159536809

Thank You "G" for all of your valuable posts.

The search button is your friend

(brad_m) · (brad_m) **Join Date: Apr 2007** 05-01-2007, 7:44 PM

Mark, Thanks for the link. Lots of good information. Looks like a lot of work for someone like me without a lot of free time. Can anyone recommend a good boat detailer in the Sacramento area? Thanks.