Articles
   
       
Pics/Video
       
Wake 101
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through September 04, 2009

Share 
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old     (antoddio)      Join Date: Dec 2006       09-03-2009, 8:06 AM Reply   
I installed a 4 outlet heater. 2 euro vents 2 hot tubes. Just about everyone that trys the heater almost immediatly mentions that the flow is pretty low. With two euro vents closed, one hot tube closed, and one open it's decent, but open 2 tubes and one euro vent and you can barely feel any flow if you put your hand 6 inches from the tube.

On the other hand i have no heat output issues at idle speed. It actually keep cranking 5 mins after i shut the engine off!

Any thoughts, is this weak flow normal? Their 40,000 BTU claim seems to be complete crap. I used a 15 amp fuse as required and actually hooked it up to a dedicated accessory wire that supplies 20 amp.

 
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 11:24 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2019 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us