Tsunami pump - body only

(buzz_grande) · (buzz_grande) **Join Date: Mar 2004** 10-25-2007, 8:22 PM

Just need the pump body, not all the connectors/hoses. Saw a previous thread about a Chris Anthony who had some for sale, but never get a response back on e-mails. Lemme know. Thanks!

(sinkoumn) · (sinkoumn) **Join Date: Jan 2007** 10-25-2007, 8:41 PM

ehh, nevermind

(Message edited by Sinkoumn on October 25, 2007)

(buzz_grande) · (buzz_grande) **Join Date: Mar 2004** 10-25-2007, 10:08 PM

Um...OK

(kdr) · (kdr) **Join Date: Feb 2003** 10-26-2007, 5:11 AM

bassproshops.com has them for 36 bucks.

willytown12 10-26-2007, 5:47 AM

Kirk,
do they come with a plug for a cigarette lighter or did you add that?

(malibuboarder75)

You have to add the cig lighter, so add another $5.

Still cheaper than the $100 for the whole set up.

(chad_chinners) · (chad_chinners) **Join Date: Mar 2006** 10-26-2007, 8:51 AM

Anyone know where to get the Cig Lighter from?

(wakemetoday) · (wakemetoday) **Join Date: Mar 2006** 10-26-2007, 8:54 AM

Auto Zone, NAPA or any parts store should have them.

(spencerwakeside)

I have some on EBAY. 1200gph Tsunami pumps.

Tsunami 1200gph Ballast Pump

(trace) · (trace) **Join Date: Feb 2002** 10-26-2007, 11:01 AM

Spencer, you might wanna do a little better job cutting that base fitting square and cleaning the threads up.

(kdr) · (kdr) **Join Date: Feb 2003** 10-26-2007, 11:08 AM

Spencer, how is it that you are listing it in new condition, but it has obviously been hacked on. Plus the brand new ones also come with one barb fitting and a nut for mounting.

(buzz_grande) · (buzz_grande) **Join Date: Mar 2004** 10-26-2007, 11:11 AM

Thanks guys. The ones w/o the cig lighter.... do they have just the bare wires sticking out, or do you have to open them up? I have the lighter, and all the fittings. Guess I will give them a call. Thanks again.

(spencerwakeside)

Trace and Kirk,
Yeah, the one I took the picture of was definitely the worst cut job. They are new except for the stem hack. Most of them have a clean cut but they all will take a fitting. The elbow does not come with them. I do have some but when we order from Attwood those pieces are separate part numbers. I have them in stock if a customer were to need one. As for the shortened length, the stem is quite long and it is really not necessary in most cases. I have the uncut pumps as well but I am trying to get rid of these ones.

Buzz,
These have the positive and negative leads sticking out the side.

(jon4pres) · (jon4pres) **Join Date: May 2004** 10-26-2007, 11:26 AM

There are wires sticking out the top Look at spencers ebay ad. The wires are like that but he hacked it up. It also looks like there is soder left on the wires from where it was hooked up before. Check out wakeside or bass pro. Both have the pumps.

(spencerwakeside)

After looking at the pumps we did do a number on them. We were building ballast pumps to work with Fly High sacs and didn't really ever get the project rolling. This is whats left. The wires are both crimped with connector pins that our 12v adapters fit right into.

(nasty530) · (nasty530) **Join Date: Aug 2007** 10-26-2007, 12:48 PM

So in what way are these new?

(spencerwakeside)

They have never been used in the water or powered up. They have been modified for the purpose of making them into stand alone ballast pumps. There is a picture of the pump and that is what you get. I am trying to get them out the door which is the reason for the $35 shipped price. I am in no way trying hide anything. People can see exactly what they are getting. I have modified the auction to reflect the concerns from this forum post.