Locker Sac for 2000 Xstar/205V/X1

(xstarrider) · (xstarrider) **Join Date: Jun 2007** 07-22-2007, 11:32 AM

Well aftr 7 Yrs my center bag decided to go on me. The seam split. So I am curious on thougts on what to replace it with. The factory MC bag seemed to fill it up pretty well (300), but Is there another bag maybe you all would recommend to give me a little more weight? I like hitting the switch and filling and when its filled it overflows so I know to shut it off. So if I go too big on a bag I think the locker will open a little and that will not happen.
Was thinking tube sac from fly high as the other option, but am wide open on others thoughts or recommendations

(1boarder_kevin)

I use the tube sac in my X1. Side to side it fits OK, but it could be longer to get more weight. If you wanted to get a little more weight and didn't mind to spend more money, fly high will custom make it for that location. I'm sure they have done this in the past and probably have the exact measurements already.

(phat_in_cincy) · (phat_in_cincy) **Join Date: May 2003** 07-23-2007, 5:45 AM

Here's my custom center bag. I don't remember the dimensions (I can dig them up later), but it came in bigger than ordered so it COMPLETELY fills the center.

I think the standard is the Fly High stuff now.
Upload

(etakk7) · (etakk7) **Join Date: Apr 2006** 07-23-2007, 6:45 AM

Paul, I think I remember you saying the dimensions of your bag were 10x10x80

(phat_in_cincy) · (phat_in_cincy) **Join Date: May 2003** 07-23-2007, 7:03 AM

Sounds about right!
Thanks!

(phat_in_cincy) · (phat_in_cincy) **Join Date: May 2003** 07-23-2007, 7:06 AM

Here it is...not quite full.
Upload