Perfect Pass Problem

(damned04) · (damned04) **Join Date: May 2005** 06-12-2007, 12:10 PM

I went to turn on my boat yesterday and my perfect pass display did not show up. I checked all the plugs in the module and none were bent or not plugged it. Anyone know if this is a serious problem?

(jayc) · (jayc) **Join Date: Sep 2002** 06-12-2007, 1:06 PM

Its a serious problem if your not a good enough driver to keep the speed manually.

Have you checked the fuse and do you have a meter to check the voltages to the main module?

(damned04) · (damned04) **Join Date: May 2005** 06-12-2007, 6:10 PM

Where do I check the fuses, Im gonna grab my volt meter with me next time I go out and check it. Btw It kind of is a serious problem cus only one guy knows how to drive my boat with out PP besides me.

(hamkj) · (hamkj) **Join Date: Apr 2002** 06-12-2007, 6:42 PM

Perfect Pass offers some of the best customer service known to man... Check out their website... and call them. You will have your problem solved in a few minutes.

(johnny_defacto)

I guess that all the pro drivers on tour are not good enough to keep the speed manually... cuz they all use a cruise-control system...

I dont know about you Jay, but empty the boats i have driven are very difficult to keep at exactly 23 or 24.5 or what have you... and when that same boat is slammed??? impossible.

Do what Kyle says... through email or on the phone, those guys will help you fix it if its fixable.

(xcharrier) · (xcharrier) **Join Date: Jul 2002** 06-13-2007, 1:01 PM

My PP module that I have mounted under my dash has an inline fuse right there... other than that I'm not sure where other fuses would be.

(ronnyboy27) · (ronnyboy27) **Join Date: Nov 2005** 06-13-2007, 1:07 PM

Travis doesn't use perfect pass and he is THE DRIVER for the PWT. Send him a PM and ask him. He had an article in Alliance or Wakeboarding Mag a month or two ago. Not that I can keep that good of speed cause I want to watch the rider too much.