Articles
   
       
Pics/Video
       
Wake 101
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through October 28, 2007

Share 
Reply
 
Thread Tools Display Modes
Old     (sscott0203)      Join Date: Sep 2007       10-03-2007, 1:27 PM Reply   
I am about to have roughly 20 different led pods and strips in my boat. I am curious what would be the easiest way to wire it.I have a acc. switch on my dash that is not being used so i going to get power from that. So should i run one wire from that around the whole boat and then just tie into in the different spots the led's are, and do the same for a ground wire. Next option run each led and its positive and negative wires all up to the front of the boat under the dash and tie all in there. Can anyone give me some idea's on an easy way to do this or how you did it.Thanks in advance
Old     (nasty530)      Join Date: Aug 2007       10-03-2007, 1:57 PM Reply   
one set of wires around the whole boat. I can even imagine the mess from all of those wires runing up under your dash. scares me just thinking about it
Old     (razzman)      Join Date: Dec 2006       10-03-2007, 2:44 PM Reply   
One wire around with all tied in was how i did it, works ok so far. I did put an inline fuse in just in case between the switch and the power source.
Old     (bcrider)      Join Date: Apr 2006       10-03-2007, 4:27 PM Reply   
I just cut the wires off of the stock interior lights and wired in the LED's so I didn't have to run a new switch and then just spliced in lengths of wire to get me to the other locations ie cup holders and to my 2-2" color changing LED bars under the side gunnels. The lights are tied in with the Navi lights.
Old     (w00taz)      Join Date: Jun 2007       10-03-2007, 4:38 PM Reply   
ahh reminds me of christmas time. I wouldn't want to troubleshoot a single circuit but then again the wire mess of one pair for each light either.
Old     (dreevs)      Join Date: Jul 2002       10-04-2007, 5:59 AM Reply   
Dave - you can do that? Thats what I wanted to do, but it just seemed too easy. Did you have to get certain gauge wire for the branchs to your cup holders? Certain sized LEDS for the interior light locations? Did you follow the existing wire path with a different gauge wire for the LEDS or did you just splice in the LED at the interior light location?
Old     (canecorso)      Join Date: Aug 2007       10-04-2007, 7:37 AM Reply   
20awg wire will be plenty, leds only consume 20-30mA, id wire in parallel to prevent one led taking out the whole system
Old     (razzman)      Join Date: Dec 2006       10-04-2007, 8:30 AM Reply   
One LED going out won't take out the whole system, at least it didn't on mine when a pod failed and mine are all on one power/ground string.
Old     (canecorso)      Join Date: Aug 2007       10-04-2007, 8:35 AM Reply   
Exactly it wont since that setup is in parallel, series setup would have...
Old     (bcrider)      Join Date: Apr 2006       10-04-2007, 9:44 AM Reply   
One burnt out light won't take everything out.

Ted- yes you can do that and it is easy. I just spliced in to the interior wiring. I literally left a few inches so I could always splice back at a later date if I wanted to and spliced right in the OEM wiring.
Old     (razzman)      Join Date: Dec 2006       10-04-2007, 10:31 AM Reply   
I did the same with other lights and just used good quality male/female connectors so i could re-connect the factory wiring at any time.
Old     (dreevs)      Join Date: Jul 2002       10-04-2007, 12:49 PM Reply   
What type LED light did you replace your interiors with?
Old     (04outback)      Join Date: Jul 2007       10-04-2007, 1:39 PM Reply   
I am sure most of us have a Anchor/Nav light receptacle at the back of the boat that is unused since we have a tower light.. Couldn't you tap into that wiring so it is already on the nav lighting switch?
Just a thought> Also, since my switch is a 2 way switch (1 is both nav light on front and anchor light and other is just anchor light..) you could turn on interior lights with only the anchor light....
Old     (bcrider)      Join Date: Apr 2006       10-04-2007, 3:33 PM Reply   
My switch is for All Navi and interior lights together. The stern light is just a plug that lights regardless of what's on or not.
Old     (sscott0203)      Join Date: Sep 2007       10-04-2007, 4:42 PM Reply   
Thanks for all the help guys.Ended up running 18 gauge wire. Positive from my acc switch to a inline fuse and then all around the whole boat along with the ground.Only made it up the one side as i waiting for more led's to arrive
Old     (nasty530)      Join Date: Aug 2007       10-04-2007, 4:53 PM Reply   
where did you buy your led's from?
Old     (sscott0203)      Join Date: Sep 2007       10-04-2007, 5:18 PM Reply   
http://superbrightleds.com/index.htm for the waterproof strips that i used and about to order the rest from www.led-concepts.com
Old     (05mobiuslsv)      Join Date: Apr 2006       10-04-2007, 6:10 PM Reply   
Weren't people having problems with www.led-concepts.com?
Old     (sscott0203)      Join Date: Sep 2007       10-04-2007, 6:39 PM Reply   
someone please respond to the post above me cause i about to order several tomorrow

(Message edited by sscott0203 on October 04, 2007)
Old     (razzman)      Join Date: Dec 2006       10-04-2007, 7:28 PM Reply   
Seth i got the exact same stuff from Plasmaleds as led-concepts has for a lot less. If i remember right i got four of the 5 light pods for $28 and he shipped fast. Here's the link; http://www.plasmaled.com/ledpods.htm
Old     (sscott0203)      Join Date: Sep 2007       10-04-2007, 7:39 PM Reply   
ya wow that is very cheap compared to led-concepts are you happy with the led's you got from them?
Old     (razzman)      Join Date: Dec 2006       10-04-2007, 8:26 PM Reply   
They are all the same from what i can see. They've been working all year just fine so far.
Old     (mikeski)      Join Date: Aug 2003       10-07-2007, 10:56 PM Reply   
I am working on getting these guys up to speed on a few boat offerrings, cupholders, speaker rings, underplatform kits, etc.

www.oznium.com

They are in California local to me. I have a few of their products, so far I have been quite happy.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 2:15 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2019 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us