Perfect Pass

(eoc1212) · (eoc1212) **Join Date: Oct 2008** 12-05-2008, 10:15 AM

Hi,

I am in the process of researching/purchasing a used boat... the gentleman claims to have never used the perfect pass on the boat and "assumes it works." Besides the obvious... putting it in the water and testing it... is there a way to test the PP to see if it is working when the boat is not in the water???

This may be a dumb questions... SORRY! This is my first wakeboard boat purchase... thanks for the help!

(Message edited by eoc1212 on December 05, 2008)

(duffymahoney) · (duffymahoney) **Join Date: Sep 2008** 12-05-2008, 10:24 AM

Yeah when the boat is on the servo should auto tighten in the engine compartment. It is attached to the throttle cable. Also it beeps and the lcd unit should display. But water test should be done to make sure it works. The paddle wheel might need to be cleaned if he doesn't use it. Also you will love perfect pass!

Duffy

(ttrigo) · (ttrigo) **Join Date: Dec 2004** 12-05-2008, 10:30 AM

the guy had perfect pass, and never used it? he must be selling the boat because of a divorce!

second what Duffy said.

(mbouchard) · (mbouchard) **Join Date: May 2006** 12-05-2008, 10:56 AM

if it is a drive by wire boat - like every one we've sold for the past 2 years.... it has no servo. you have to put it in the water.

(eoc1212) · (eoc1212) **Join Date: Oct 2008** 12-05-2008, 11:15 AM

The boat is a 2005 23 foot Moomba XLV... would this one have a servo?

(jonblarc7) · (jonblarc7) **Join Date: Jul 2006** 12-05-2008, 11:33 AM

Also just to see if its reading a speed you can turn on perfect pass while its on the trailor and have some go under the boat and spin the paddle wheel to see if it picks up a reading of how fast your spinning the paddle wheel.

(dcb) · (dcb) **Join Date: Mar 2006** 12-06-2008, 9:17 AM

Yes the 05 will have the servo