Boss Board Racks

(pickle311) · (pickle311) **Join Date: Oct 2005** 06-14-2006, 10:18 AM

I bought a set of Boss racks back in March and I haven't been happy with them. The construction of the rack itself is good and they fit the boat fine. The problem I have it the rubber strips. They constantly pop out and trun everything they touch black. The leave black streaks on the boards that gets on everyones hands and ends up all over my boat and it's a bitch to clean. I tried to find Bosses website to contact them about it but was unable to find them. Does anyone know where I can get more of the rubber strips or how to contact Boss?
Thanks

(deuce) · (deuce) **Join Date: Mar 2002** 06-14-2006, 10:33 AM

Anyone that sells Boss racks should be able to supply you with the inserts. In fact, if you bought the racks just 3 months ago, I assume they(place you bought them) will just give you the inserts.

I have never had any of the issues you speak of, save for losing an insert.

Love my Boss racks and IMO, 100% better than my other option(Flight Clips).....

(super_air) · (super_air) **Join Date: Jun 2005** 06-14-2006, 10:35 AM

They will probably tell you to contact a dealer but here is their website. I have had trouble with the strips too but all you need to do is just put a little bit of weatherstrip adhesive in the groove to keep them in place. You might try to pull them all of the way out and clean them off with a towel and some carb cleaner and then re install them.

http://www.bosswake.com/

(acurtis_ttu) · (acurtis_ttu) **Join Date: May 2004** 06-14-2006, 12:33 PM

chek ebay, you can buy the identcial boss racks for around $125. same guy that sells the boss cans, and clamps , I think it's pyramid manufacturing?