Wake 101
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > Boats, Accessories & Tow Vehicles

Thread Tools Display Modes
Old     (colombiansurfer)      Join Date: Sep 2008       04-26-2010, 9:31 AM Reply   
Here are the pics fro my stereo project. It took a few weekends and many trips to Lowe's that they know my first name now. All of this went in an Centurion Avalanche with the Evolution tower. The tower was a PITA but got it completed. Thanks to the Hydrotunes people, Tim White and crew for lending out some advice on my project.

2 WS Syn 4
1 Pair WS Pro 80's
1 Pair WS MB-8's
1 WS 420 EQ
100' of JL 12 GA Wire
1 Fused Distribution Block 4 in 8 out
1 Ground Distribution Block 4 in 8 out
10' 4 GA JL Wire
20' 8 GA JL Wire
Attached Images
Old     (lecter098)      Join Date: Mar 2010       04-26-2010, 10:30 AM Reply   
Nice, the charger you have. You have some spacers between the charger and the wall, what are the spacers and where can I get those?
Old     (bawshogg)      Join Date: Dec 2005       04-26-2010, 10:39 AM Reply   
Those are just nylon spacers. Most any reputatable hardware stores have them. Ace usually has a good selection of that kinda stuff.
Old     (Matt)      Join Date: Mar 2010       04-26-2010, 10:56 AM Reply   
Looks sweet man, I started laughing when you said they know you by name... My local hardware store guys laugh at me everytime i come in...
"Still workin on the boat I see"
Old     (colombiansurfer)      Join Date: Sep 2008       04-26-2010, 11:14 AM Reply   
Matt, I get the same and visit the store so much, that I tell other customers where to find stuff and on which isle.

The spacers are white nylon. I used them because I have read and heard that the charger gets real hot and by the boat being in the garage during the summer and no AC, I figured it could use some air circulating to help keep it a little cooler. I used 1/2" spacers for the top and bottom. It helps.
Old     (skongolf)      Join Date: Aug 2009       04-26-2010, 11:31 AM Reply   
What size amp power wire did you use?
Old     (hatepain)      Join Date: Aug 2006       04-26-2010, 2:03 PM Reply   
Looks like 4 AWG in to distro and 8 AWG out to amps.

Awesome job david it looks really sharp. love the whole set up.

WS got the new grills right on the tower speakers.
Old     (colombiansurfer)      Join Date: Sep 2008       04-26-2010, 5:52 PM Reply   
Steve - HateNPain is correct. I used 4 GA instead of 1/0 because my batts are, as you can see in the pics, about 3 feet from the amps. If they were 10' plus then I would have used the 1/0. I used the JL 4 GA and JL 8 GA. great wire BTW and it has 2 sleeves. At first I was WTF is this and how hard it was to cut, but once you figure it out, then it is a snap. It also made it easier to pull through the tower since the inside is rough and the outer sleeve protects the inner sleeve.

Thanks Hate on the compliments. All I have to say is Attention to Detail!!


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -7. The time now is 6:11 PM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home


© 2016 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us