Tsunami flyhigh pump to Launch Pad sacs

(laraujo) · (laraujo) **Join Date: Apr 2007** 05-06-2008, 3:45 PM

Can you use a Tsunami pump (portable with adapter type) to fill a Launch Pad fat sac. Is there a way to connect it to the Launch Pad Fitting cleanly so that you can fill and drain without getting water all over. If so.. what fittings do you use?

(libertylake) · (libertylake) **Join Date: Jul 2007** 05-06-2008, 4:05 PM

You can order the quick release connectors from Straight Line or some of the other online stores. Cut off the existing connectors that came with the Tsunami pump then re-clamp the straight line connectors. Presto you have a Tsunami pump with Straight Line connection and no leaks.

(wakemikey) · (wakemikey) **Join Date: Mar 2008** 05-06-2008, 4:31 PM

Not sure if they have it but try here
http://www.wakecord.com/fat_sac_connectors.htm

(trdon) · (trdon) **Join Date: Sep 2007** 05-06-2008, 6:05 PM

The tsunami pump comes with the blue plastic adapter to fit the older style sacs.

(laraujo) · (laraujo) **Join Date: Apr 2007** 05-07-2008, 8:23 AM

I have the blue plastic adapter.. Is that what is used on the fittings of the Launch Pad Series sacs? thanks in advance everybody

(sangerlover) · (sangerlover) **Join Date: Sep 2005** 05-07-2008, 8:36 AM

The uber pump from launch pads comes with both the "no leak fitting" and the plastic blue adapter. You can use the blue adapter but like I say you will have a few gallons of water in the boat. You can buy the uber pump fitting at wakeside.com and then should be able to attach that fitting to the Tsunami pump