driver's kick panel

(ladythump) · (ladythump) **Join Date: Jul 2004** 03-21-2005, 12:47 PM

Does anyone know how the driver's kick panel comes out of a ski brendella? would it have to be cut out with a saw?

(monstertower) · (monstertower) **Join Date: Mar 2003** 03-21-2005, 7:41 PM

On most boats it is glassed in I think. If your adding a sub you will need to make the cutout with a saw. Can you post pics and more about what you need to do.

whitechocolate 03-21-2005, 7:53 PM

Ok no problem, Let me see, get a 10 mm and a flat head screw driver remove the heater tube, and the fuse pannel, then Place this

where the kick pannel sits light it and the and run

whitechocolate 03-21-2005, 7:53 PM

the kick pannel should be removed when your done

(ladythump) · (ladythump) **Join Date: Jul 2004** 03-22-2005, 7:14 AM

Thanks Grant! you're the best!
I'll take some pics from I believe the panel is glassed in.

whitechocolate 03-22-2005, 7:31 AM

R: thats ok. This one was glassd in and it didnt stand a chance,

I used one one bomb to blow it open and a 2nd one to clear the left over's

(Message edited by whitechocolate on March 22, 2005)

(Message edited by whitechocolate on March 22, 2005)

whitechocolate 03-22-2005, 7:35 AM

I have a collection of photos of how I removed the foot rest from Jasons 209. Im sure yours is not the exact same but you can get the idea.
www.svtsupercharged.com/gallery

click on jasons boat