how do you stash your boards?

(bikeman) · (bikeman) **Join Date: Nov 2001** 05-31-2006, 10:16 AM

dock is too narrow to drive in with boards in racks - anyone have a homeade/cheap way to store them on the upper/roof part of your tower? pics?

(caskimmer) · (caskimmer) **Join Date: Apr 2006** 05-31-2006, 10:32 AM

You could always get a good boardbag for it

(stixxmon) · (stixxmon) **Join Date: May 2006** 05-31-2006, 10:59 AM

2" cold water insulation tiewrapped to the tower with key chain eyes under wraps, two bundgi cords. All I used for 20 years. Works great for under$10.00. or call Titan or Lake Shore

surfdad 05-31-2006, 11:17 AM

Hey Jerry, you mean Shoreline Lakeboards, right?

(stixxmon) · (stixxmon) **Join Date: May 2006** 05-31-2006, 11:47 AM

Yes, Shoreline. They have a great rack for up top.

(bikeman) · (bikeman) **Join Date: Nov 2001** 05-31-2006, 4:02 PM

Jerry, exactly what I was looking for. Any way you could send pics, I think I've got it but a pic would really help. Thanks a ton!

(stixxmon) · (stixxmon) **Join Date: May 2006** 05-31-2006, 10:01 PM

Cris,
This is a pic of my old boat with the same set up on the side of the tower, but you can do the same on top

(stixxmon) · (stixxmon) **Join Date: May 2006** 05-31-2006, 10:15 PM

Cris, This is a pic of my old boat with the same set up on the side of the tower. run the tie wraps thru a eye ring on each end of the insulation, before you wrap it around the tower. These ring are where you connect the bungies. Crimp one end or the bungie hook so you do not send it to the bottom of the lake when taking Stixx on and off...Jerry Upload

surfdad 06-01-2006, 5:48 AM

Jerry, two things: don't forget our "most generous" NorCal INT League Wakesurfing Series sponsor 2nsane's board rack :-)

Also, you have to a microscope to see that picture, dude! :-)

640x480 with 80% res. that will turn out a perfect size and resolution for WW. Then JUST before you go to upload the picture, hit the return (or enter) key in your message and it will place the picture below the last line of text. So that after the upload the text will look like this:

the bottom of the lake when taking product name.

\popjpeg

Okee dokeee?