MC x9/209 or x7/197 sub box

(westcoastrider31)

Does anyone have pictures or plans for a custom sub box that will fit under the dash of any of these boats?

(grant_west) · (grant_west) **Join Date: Jun 2005** 10-18-2007, 3:17 PM

Yo "Billy Bob"

I did a system in a buddys 209 a few years back.
The section @ the drivers feet has a huge foot rest. If you wanna leave it there then I have no suguestions for you but if you feel like chopping it out its no big deal here are some pictures
Upload

(grant_west) · (grant_west) **Join Date: Jun 2005** 10-18-2007, 3:20 PM

(chris_tige_20v)

nice work Grant

(grant_west) · (grant_west) **Join Date: Jun 2005** 10-18-2007, 3:31 PM

Thanks Chris. This system no longer exists. It was stolen while in so called secure storage

. We thik it was a inside job. Clay re did the system and now its running 4 flat line Arc audio 12's, Booooom

(westcoastrider31)

the install looks great. I was hoping to leave the foot rest in place... but i don't know if there is enough room to even run a 10 or 12 in a ported box

(phatboypimp) · (phatboypimp) **Join Date: Apr 2005** 10-18-2007, 7:23 PM

I think this is the best looking boat I have ever seen on Wakeworld....

(soundbox) · (soundbox) **Join Date: Oct 2007** 10-18-2007, 8:06 PM

Great install. It looks like the W7 was mounted directly into the plexi. How did you prevent cracking of the plexi?

(mcwakerider) · (mcwakerider) **Join Date: Dec 2006** 10-18-2007, 9:43 PM

we had a ten in a ported box in our x-9. It fit fine and you still had plenty of leg room... the sub was facing out towards the water. ill try to get a pic posted. It was a mtx 7500 ten. it hit very well for one ten

(mcwakerider) · (mcwakerider) **Join Date: Dec 2006** 10-18-2007, 9:57 PM

(acurtis_ttu) · (acurtis_ttu) **Join Date: May 2004** 10-19-2007, 6:37 AM

I had this under my dash...10w6 in a ported box. It was behind the fasica board. 10w6 only needs a little over 1 cube.

Upload