Ok it's winter and im at it again. I bought this LED trailer light Sequencer from Owl Lighting. last year with the intention I would get right on it and one thing led to another and Im finally getting it done. Im glad I waited. This job cant be done with the boat on the trailer.
Here's how it works. You install LED's length wise down your trailer. I chose to install 40 LEDs. 20 on each side of the trailer. 10-1/2 apart all the way down the trailer.
I made these metal strips that the LED lights attach to.
The metal strips attach to the trailer.
This Black box is a water switch. It mounts at the back of the trailer and when it touches water it turns on the Sequencer. The Sequencer will make the lights turn on in a wave. It will look like a Airport landing strip.
That's all I have for now. I have to paint the metal strips and then wire the system up.
I have a tone of stuff to do to the trailer. Im gonna re carpet the bunks and re wire all the lights. The wire job DHM did is a JOKE. New saftey chains, new trailer jack, Im gonna detail the entire trailer. Take the hub's apart and rebuild everything.
Hybrid Mode
