Bracing divider between locker and engine

(you_da_man) · (you_da_man) **Join Date: Sep 2009** 06-05-2010, 1:21 AM

I got my 1100lb sacs for the v-drive locker in my Moomba XLV. Just wondering how everyone is bracing up the divider wall to prevent any issues with these huge sacs. Pics would be nice if you can get them.

(liljohn) · (liljohn) **Join Date: May 2007** 06-05-2010, 9:53 AM

Personaly I found some 1"x1" stainless steel tubing cut it to length and thru bolted it to the wall. works great. I have seen others use aluminum L metal found at H.D. or lowes. three pieces should be enough.

(you_da_man) · (you_da_man) **Join Date: Sep 2009** 06-05-2010, 10:45 AM

Running the braces vertically right?

(liljohn) · (liljohn) **Join Date: May 2007** 06-05-2010, 7:00 PM

correct! make them as long as you can and still get the divider out.

(gunz) · (gunz) **Join Date: Sep 2001** 06-06-2010, 7:07 AM

1 7/8" aluminum strut mounted to the floor,the divider slips inside of it,L brackets on the sides.