Articles
   
       
Pics/Video
       
Wake 101
   
       
       
Shop
Search
 
 
 
 
 
Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
WakeWorld Home
Email Password
Go Back   WakeWorld > >> Boats, Accessories & Tow Vehicles Archive > Archive through October 28, 2007

Share 
Reply
 
Thread Tools Display Modes
Old     (bjeremi)      Join Date: Mar 2006       10-09-2007, 10:21 AM Reply   
I purchases a couple of fat sacs off of ebay that I believe are factory sacks for the rear compartments in either a supra or a moomba. They are the 275lb sacks. My question is I want to eventually plumb these in but that will be a winter project right now I just want to use them until the seasons over. There are three fittings on the sacks one with a cap and two that without that appear to be just some sort of quick release fitting. What fittings do I need to plug these two open ones and fill the sack manually with a regular aerator pump? Do I need special ones from fly high or is there an alternative. Thanks.
Old     (byrd)      Join Date: Dec 2005       10-09-2007, 10:50 AM Reply   
You need the special ones from Fly High if you want to plug it in an go. I have seen a conversion to regular pipe thread, but I wouldnt do that until you are ready to make it permanant. Go with the correct fittings and it will be a breeze now and in the future.
Old     (masonwakerider)      Join Date: May 2003       10-09-2007, 10:51 AM Reply   
fly high uses a standard 3/4" pipe thread, hardware / plumbing stores will sell something that works. Or call a shop that sells fly high they will probaly have a couple of plugs laying around. I would send you my extra's but they are at lake
Old     (bjeremi)      Join Date: Mar 2006       10-09-2007, 11:01 AM Reply   
Yeah the one with the cap I don't think will be an issue. It's just the ones with the quick release thingy's. They appear to be permanenat and they don't screw out or anything.
Old     (vlxray)      Join Date: Mar 2005       10-09-2007, 12:58 PM Reply   
I'm pretty sure that Wakeside.com sells all kinds of fittings and adaptors for the newer Fly High sacks. You should be able to get a fitting to convert the quick release valve to a standard threaded fitting so that you can plumb them into your factory system.
Old    lakeside5_10            10-09-2007, 1:07 PM Reply   
try www.buywake.com
Old     (acurtis_ttu)      Join Date: May 2004       10-09-2007, 2:11 PM Reply   
J.Brenner, are the fitting glued in to the sac? If so, you'll never unscrew them out w/o heat. Take a hair dryer and let keep it pointed at the base of the fitting for about 5-7 min on high. You can usualoly pop them out; it trashes the fitting, but works. For detailed directions call fly high.

Reply
Share 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -7. The time now is 4:27 AM.

Home   Articles   Pics/Video   Gear   Wake 101   Events   Community   Forums   Classifieds   Contests   Shop   Search
Wake World Home

 

© 2019 eWake, Inc.    
Advertise    |    Contact    |    Terms of Use    |    Privacy Policy    |    Report Abuse    |    Conduct    |    About Us