I have a LSV, but a VLX may be the same. I put in a Fluid Concepts bag with both fittings on the aft end. My question is do the Blue Magic fittings go fwd or aft of the dividing wall? The original set-up had the pump "neck" go thru the wall, then fitting on the bag side. Also, the original drain was at the other end. It seems to me there would be less interference with the bag if you pushed the neck/fitting of the bag thru the wall and had the pump and Blue Magic on the aft side. Any experience with this? Also,did you route the "fill" tube and fitting thru the wall , or just let it cram up against it on the fwd side as it filled? Thanks, scott
|