Jason's 209 - Page 4

josh_tn 05-19-2005, 7:08 AM

Thanks Chris, that makes me feel much better about setting mine up that way.

(jeffry) · (jeffry) **Join Date: Feb 2005** 05-20-2005, 9:16 PM

So where is the tower box?

(shawnmdarnell) · (shawnmdarnell) **Join Date: Feb 2003** 05-21-2005, 2:11 PM

i am sure when he gets something up there, he will post some pics!

(phatboypimp) · (phatboypimp) **Join Date: Apr 2005** 05-23-2005, 12:19 PM

The Tower Box for the 209 is still under construction. I was told it would be done in time for Memorial Day weekend, but I doubt it will be done. It will house six Pioneer 6x9's (two forward/four back) and xenon tower lights. Should be pretty trick if we can ever get it done. Will post when pictures arrive.

(mikeski) · (mikeski) **Join Date: Aug 2003** 05-23-2005, 1:36 PM

Whatever happened to the Image Dynamics Horns???

(jeffry) · (jeffry) **Join Date: Feb 2005** 05-24-2005, 12:05 AM

I think that was JUDE'S tower box.

whitechocolate 05-26-2005, 2:12 PM

Mike: cant you keep all the project's in order, LOL

Ok we are almost finished. Here is some photo's of the tower wired. Because the tower not olny folds down it also comes apart. Jason wanted it to be able to be fully diss-asembled. I needed to use a few quick dis-connect's, This was the first time I used the Neutrick Speakon line and pole connectors they worked great. How ever I wished I didnt need the double female connector's t make them work. There is a disconect at each joint and at the tower box. I used a water proof threw hull connector to run the wire's threw the top of the deck and into the tower

(2high4u) · (2high4u) **Join Date: May 2004** 05-26-2005, 3:28 PM

How many speaker cables can be run through those connectors?

whitechocolate 05-26-2005, 4:45 PM

The ones I used were 4 pole, , Any One know if Speakon makes connectors with more than 4 pole's

(rich_x2_owner) · (rich_x2_owner) **Join Date: Apr 2004** 05-26-2005, 9:27 PM

I believe Speakon makes an 8 pole connector.

(skibum69) · (skibum69) **Join Date: Aug 2004** 05-27-2005, 5:21 AM

Yes Speakon makes an 8 pole connector, I am using one for my tower.
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=092-051

tod 05-31-2005, 6:55 AM

They also make male cable end connectors so you do not have to use the double male adapter.

http://www.sweetwater.com/store/detail/NC3MX/

tod 05-31-2005, 7:33 AM

Sorry it was a long weekend, the link above shows the XLR. Check Neutrik page for the female cable end part numbers. I belive parts express sells them........

http://www.neutrik.com/start.asp